Skip to the manual
GeoTerva Start free
User manual · Stresses in a soil mass

Stresses in a soil mass: the user manuals

Twelve modules give the stress increase in the ground below loads at the surface, by the theory of elasticity. This page helps you choose the module that matches your load and links to the manual of each.

Updated 17 October 2026 · GeoTerva user manual

Which stress module do I need?

The Stresses in a Soil Mass family has twelve modules. They answer one question: by how much does a load on the ground raise the stress at a point below it? Pick the module whose load looks like yours.

The load on the groundModule
One or several concentrated loads, such as a column or a wheelPoint load
One or several vertical line loads in plane strain, such as a long narrow footingVertical line load
A horizontal or inclined line loadHorizontal line load
A uniform vertical load on a strip, such as a strip footing or a roadVertical strip load
A horizontal or inclined load on a stripHorizontal strip load
A strip load that rises from zero at one edge to q at the otherTriangular strip load
A long embankment with side slopesEmbankment
A uniformly loaded circle, such as a tank, at any point below or beside itCircle, any point
A uniformly loaded rectangle, at any point below or beside itRectangle
A loaded area of any polygonal shape, drawn on Newmark’s influence chartInfluence chart
A point load on layered ground with thin rigid seams (Westergaard material)Westergaard point load
Circles and rectangles together on a Westergaard materialWestergaard areas

The twelve manuals

Each manual follows the same plan: what the module calculates, what you need before you start, a quick start, the screen and its views, every input, the results, the report, a worked example you can reproduce, a table of how each input changes the answer, the messages the module gives, and answers to common questions.

What the twelve modules share

  • The workspace. The drawing, the tabs, Analyze and the input lock, units and the report follow the same layout as the other GeoTerva modules. See the workspace guide.
  • Several loads in one model. The modules add several loads of the same kind to one model and add their effects.
  • Point A. You choose the point below or beside the loads where you want the stress; it can be placed on the drawing.
  • Four views. The section with the lines of equal stress, the colour contours, the depth profile under the point, and a 3D view with the stresses on an element.
  • Loads moved on the drawing. Loads, their edges and point A can be dragged where the module allows it; each manual lists what moves in that module.

The solutions side by side

ModuleLoadSolution
Point loadPoint loadsBoussinesq
Vertical line loadVertical line loadsElastic half-space, plane strain
Horizontal line loadHorizontal or inclined line loadsElastic half-space, plane strain
Vertical strip loadVertical stripsElastic half-space, plane strain
Horizontal strip loadHorizontal or inclined stripsElastic half-space, plane strain
Triangular strip loadTriangular stripsElastic half-space, plane strain
EmbankmentTrapezoidal embankmentsSuperposition of strip loads
Circle, any pointUniform circlesBoussinesq integrated over the circle
RectangleUniform rectanglesCorner superposition
Influence chartAny polygonNewmark’s influence chart and the exact integral
Westergaard point loadPoint loadsWestergaard, compared with Boussinesq
Westergaard areasCircles and rectanglesWestergaard, compared with Boussinesq

A typical stress calculation in order

  1. Choose the module

    Pick the one whose load looks like yours and open its manual for the fields.

  2. Describe the loads

    Enter each load with its size and position, or drag it on the drawing before Analyze.

  3. Place point A and the profile depth

    Give the point where you want the stress and the depth down to which the profile runs.

  4. Analyze and read the answer

    Press Analyze. Read the stress at A, the lines of equal stress and the profile with depth, then save a report with the cover filled in.

Frequently asked questions

How do I calculate the stress increase below a footing with GeoTerva?

Open the module for the shape of the load: Vertical strip load for a strip footing, Rectangle for a rectangular footing, Circle, any point for a circular one. Enter the load and its size, place point A, press Analyze, and read the stress at A with the lines of equal stress and the profile with depth.

Which module gives the stress under a point load?

Point load, by Boussinesq, for one or several loads. Westergaard point load gives the Westergaard value with the Boussinesq value for comparison.

Can I add several loads in one model?

Yes. Each module adds several loads of its kind to one model and gives the total effect at point A.

What is the Influence chart module for?

It handles a loaded area of any polygonal shape on Newmark’s influence chart and compares the chart with the exact integral.

What is a Westergaard material?

A soil with thin rigid seams, such as clay with seams of sand. The Westergaard modules give the stress in it and the Boussinesq value for comparison.

Can I move a load on the drawing?

Yes, in the modules that allow it. Drag the load or its edges on the drawing before Analyze; point A can also be dragged. Each manual lists what moves.