Which settlement module do I need?
The Settlement family has four modules. They answer one question: how far does a foundation settle? The stress increase below the foundation is summed layer by layer down to the influence depth, and the stresses and the settlement are drawn as colour bands over the section. The modules differ in the kind of settlement they work out. Pick the one that matches your ground and the question you need answered.
| Your question | Module |
|---|---|
| The primary consolidation of clay layers and how fast it happens, with the excavation, the swelling and the recompression of each layer | Consolidation settlement |
| The immediate settlement of clay and silt, undrained | Elastic settlement, cohesive |
| The settlement of sand and gravel, drained | Elastic settlement, granular |
| The total settlement of a profile with both kinds of layer: immediate settlement plus consolidation, and the settlement against time | Settlement 2D |
The four manuals
Each manual follows the same plan: what the module calculates, what you need before you start, a quick start, the screen, every input section by section, the choices that decide the answer, the results, the report, a worked example you can reproduce, a table of how each input changes the answer, the messages the module gives, and answers to common questions.
What each module takes, side by side
| Module | Ground | Settlement |
|---|---|---|
| Consolidation settlement | Clay layers | Primary consolidation along the full stress path, against time |
| Elastic settlement, cohesive | Clay and silt, undrained | Immediate, by the theory of elasticity |
| Elastic settlement, granular | Sand and gravel, drained | Immediate, by the theory of elasticity |
| Settlement 2D | Clay and sand layers together | Immediate plus consolidation, against time |
The two elastic modules apply Steinbrenner’s influence factors layer by layer and give the settlement at the centre, at the corner and for a rigid foundation.
A typical settlement calculation in order
- Choose the module
Pick the one that matches the ground and the settlement you need, and open its manual for the fields.
- Describe the foundation
Enter its shape and size, its depth and the pressure it applies.
- Describe the layers
Enter the thickness and the soil parameters of every layer, and the water table.
- Analyze and read the answer
Press Analyze. Read the settlement of every layer and the total, look at the colour bands, then save a report with the cover filled in.
Frequently asked questions
How do I calculate the settlement of a foundation with GeoTerva?
Open the module for your ground: Consolidation settlement for clay layers, Elastic settlement, cohesive or granular for the immediate settlement, or Settlement 2D for the total over both kinds of layer. Enter the foundation and the layers, press Analyze, and read the settlement of every layer and the total.
Which module gives the total settlement of clay and sand together?
Settlement 2D. It adds the immediate settlement of every layer, clay undrained and sand drained, to the consolidation of the clay layers.
Which modules draw the settlement against time?
Consolidation settlement and Settlement 2D draw the settlement against time by Terzaghi’s theory.
What is the difference between the cohesive and the granular elastic modules?
The cohesive module takes clay and silt that settle undrained, with the undrained modulus. The granular module takes sand and gravel that settle drained, with the drained modulus and Poisson’s ratio. Granular soil has no consolidation to add.
What do centre, corner and rigid settlement mean?
The elastic modules give the settlement at the centre and at the corner of a flexible foundation, and the settlement of a rigid foundation.
Where does the influence depth stop?
The stress increase is summed layer by layer down to the influence depth, which the modules take by the stress ratio or from a rigid base.