GeoTerva 7 gün ücretsiz dene

Kumda kazık taşıma gücü modülü

Kuma çakılan tekil bir kazığın uç ve çevre direnci.

Ücretsiz bir hesapla her modül 7 gün boyunca ücretsiz açılır.On bir modül ise hiç hesap gerekmeden çözümlü bir örnekle açılır: deneyin.

Uç direnci Meyerhof, Vesic ya da Coyle & Castello yöntemiyle, çevre sürtünmesi K–δ yöntemiyle ya da Coyle & Castello yöntemiyle hesaplanır; her biri ayrı ayrı seçilir. Gövde boyunca efektif gerilme, yeraltı su seviyesine ve kritik derinliğe göre belirlenir.

Girdiler

  • Kazık boyu, kare ya da dairesel kesit
  • γ ve φ′ ile kum tabakaları
  • Yeraltı su seviyesi
  • Uç ve gövde için yöntemler, güvenlik sayısı

Çıktılar

  • Qp, Qs, Qu ve Qall
  • Kazık boyunca birim çevre sürtünmesi
  • Efektif gerilme profili
  • Zemindeki kazığın 3B görünümü
Kazıklar · Kumda kazık
Kumda kazık taşıma gücü modülü: çözümlü örnek üzerindeki ekranları — model, sonuçlar, hesaplar ve teori

Analizden sonra çizim ve karar.

Daha fazlası

Kazıklar paketindeki diğer modüller

Kullanımı neden kolay

Çevrim içi, tarayıcınızdaBilgisayarınızda tarayıcı dışında hiçbir şey çalışmaz: sayfayı açın ve çalışmaya başlayın.
Donanım kilidi yok, kurulum yokLisans anahtarı, donanım kilidi ya da güncel tutulması gereken bir kurulum yoktur.
Telefonda, tablette ya da bilgisayardaGüncel her tarayıcıda aynı modül; ekran düzeni cihaza göre uyarlanır.

Questions about the Pile in sand module

What does the GeoTerva Pile in sand module calculate?

Point and skin resistance of a single pile driven into sand. The point bearing by Meyerhof, Vesic or Coyle & Castello and the skin friction by the K–δ method or by Coyle & Castello, each chosen on its own. The effective stress along the shaft follows the water table and the critical depth.

What do I enter in the Pile in sand module?

Pile length, square or circular section; sand layers with γ and φ′; water table; and methods for the point and the shaft, factor of safety.

What results does the Pile in sand module give?

Qp, Qs, Qu and Qall; unit skin friction down the pile; the effective stress profile; and A 3D view of the pile in the ground. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile in sand module use?

Meyerhof; vesic; and coyle & Castello.

How much does the Pile in sand module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile in sand module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.