GeoTerva 7 gün ücretsiz dene

Kazık grubu modülü

Tabakalı zemindeki bir kazık grubunda her kazığa gelen yük, grup etkisi, oturma ve yanal yük altındaki davranış.

Ücretsiz bir hesapla her modül 7 gün boyunca ücretsiz açılır.On bir modül ise hiç hesap gerekmeden çözümlü bir örnekle açılır: deneyin.

En fazla sekiz kum ve kil tabakasında, rijit bir başlık altındaki düşey kazık grubu. Başlık yükü kazıklar arasında paylaştırılır; taşıma gücü, her tabakada kendi zeminine ait grup verimiyle tekil kazıklar olarak ve bir blok olarak hesaplanır, küçük olan belirleyicidir; oturma, grubun elastik oturması ile 2L/3 derinliğinin altındaki kilin konsolidasyonundan oluşur; yanal yük altında ise sıralar yükü, tabakaların p–y eğrilerine uygulanan p-çarpanlarıyla eşit olmayan biçimde paylaşır.

Girdiler

  • Sıralar ve kazıklar, aralık, kesit ve boy
  • Kum ya da kil, en fazla sekiz tabaka
  • Yeraltı su seviyesi
  • Başlıkta düşey yük, yanal yük ve momentler

Çıktılar

  • Her kazığa gelen yük, basınç ve çekmede
  • Grup verimi, blok taşıma gücü ve emniyetli yük
  • Elastik oturma ve konsolidasyon oturması
  • Başlığın yerdeğiştirmesi ve her sıranın yükü
Kazıklar · Kazık grubu
Kazık grubu modülü: çözümlü örnek üzerindeki ekranları — model, sonuçlar, hesaplar ve teori

Analizden sonra çizim ve karar.

Daha fazlası

Kazıklar paketindeki diğer modüller

Kullanımı neden kolay

Çevrim içi, tarayıcınızdaBilgisayarınızda tarayıcı dışında hiçbir şey çalışmaz: sayfayı açın ve çalışmaya başlayın.
Donanım kilidi yok, kurulum yokLisans anahtarı, donanım kilidi ya da güncel tutulması gereken bir kurulum yoktur.
Telefonda, tablette ya da bilgisayardaGüncel her tarayıcıda aynı modül; ekran düzeni cihaza göre uyarlanır.

Questions about the Pile group module

What does the GeoTerva Pile group module calculate?

The load on every pile, the group effect, the settlement and the lateral response of a group in layered ground. A group of vertical piles under a rigid cap, in up to eight layers of sand and clay. The cap load is shared among the piles; the capacity is worked out as individual piles, each layer with the efficiency of its own soil, and as a block, and the lesser governs; the settlement is the elastic settlement of the group and the consolidation of the clay below 2L/3; and under a lateral load the rows share it unequally, by p-multipliers on the p–y curves of the layers.

What do I enter in the Pile group module?

Rows and piles, spacing, section and length; up to eight layers, sand or clay; water table; and vertical load, lateral load and moments on the cap.

What results does the Pile group module give?

The load on every pile, in compression and tension; efficiency, block capacity and the allowable load; elastic and consolidation settlement; and the deflection of the cap and the load of every row. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile group module use?

Converse–Labarre; kishida–Meyerhof, AASHTO; block failure; and p-multipliers.

How much does the Pile group module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile group module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.