GeoTerva 7 gün ücretsiz dene

Tabakalı zeminde kazık taşıma gücü modülü

Kazık gövdesi boyunca kum ve kil tabakaları; her biri kendi yöntemiyle.

Ücretsiz bir hesapla her modül 7 gün boyunca ücretsiz açılır.Bu modül ayrıca hiç hesap gerekmeden çözümlü bir örnekle de açılır: ücretsiz demoyu deneyin.

Her biri ayrı ayrı tanımlanan, istenen dizilimde kum ve kil tabakaları. Her tabakanın gövde direnci kendi zeminine ait yöntemle, uç direnci ise kazık ucunun bulunduğu zemine ait yöntemle hesaplanır.

Girdiler

  • Kazık geometrisi
  • Kum ya da kil, en fazla sekiz tabaka
  • Yeraltı su seviyesi
  • Her zemin türü için bir yöntem

Çıktılar

  • Qp, Qs, Qu ve Qall
  • Her tabakanın payı
  • Gövde ve uç direnci diyagramları
  • Tabakaların ve kazığın 3B görünümü
Kazıklar · Tabakalı zeminde kazık
Tabakalı zeminde kazık taşıma gücü modülü: çözümlü örnek üzerindeki ekranları — model, sonuçlar, hesaplar ve teori

Analizden sonra çizim ve karar.

Daha fazlası

Kazıklar paketindeki diğer modüller

Kullanımı neden kolay

Çevrim içi, tarayıcınızdaBilgisayarınızda tarayıcı dışında hiçbir şey çalışmaz: sayfayı açın ve çalışmaya başlayın.
Donanım kilidi yok, kurulum yokLisans anahtarı, donanım kilidi ya da güncel tutulması gereken bir kurulum yoktur.
Telefonda, tablette ya da bilgisayardaGüncel her tarayıcıda aynı modül; ekran düzeni cihaza göre uyarlanır.

Questions about the Pile on layered soil module

What does the GeoTerva Pile on layered soil module calculate?

Sand and clay layers along the shaft, each with its own method. Any stack of sand and clay layers, each typed on its own. The shaft resistance of each layer is computed by the method of its soil, and the point bearing by the method for the soil the tip stands in.

What do I enter in the Pile on layered soil module?

Pile geometry; up to eight layers, sand or clay; water table; and A method for each soil type.

What results does the Pile on layered soil module give?

Qp, Qs, Qu and Qall; the share of every layer; diagrams of the shaft and point resistance; and A 3D view of the layers and the pile. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile on layered soil module use?

K–δ; coyle & Castello; and α, λ, β.

How much does the Pile on layered soil module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile on layered soil module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.