GeoTerva 7 gün ücretsiz dene

Kilde kazık taşıma gücü modülü

Drenajsız kildeki tekil bir kazığın uç ve çevre direnci.

Ücretsiz bir hesapla her modül 7 gün boyunca ücretsiz açılır.On bir modül ise hiç hesap gerekmeden çözümlü bir örnekle açılır: deneyin.

Tabakalı kilde uç direnci Meyerhof, Vesic ya da Reese & O’Neill yöntemiyle, çevre sürtünmesi α, λ ya da β yöntemiyle hesaplanır. Her tabakanın kendi cu değeri vardır ve adezyon katsayısı her tabaka için gösterilir.

Girdiler

  • Kazık geometrisi
  • γ ve cu ile kil tabakaları
  • Yeraltı su seviyesi
  • Uç ve gövde için yöntemler, güvenlik sayısı

Çıktılar

  • Qp, Qs, Qu ve Qall
  • Tabaka tabaka sayısal değerleriyle α, λ ya da β
  • Kazık boyunca çevre sürtünmesi
  • Direnç diyagramları
Kazıklar · Kilde kazık
Kilde kazık taşıma gücü modülü: çözümlü örnek üzerindeki ekranları — model, sonuçlar, hesaplar ve teori

Analizden sonra çizim ve karar.

Daha fazlası

Kazıklar paketindeki diğer modüller

Kullanımı neden kolay

Çevrim içi, tarayıcınızdaBilgisayarınızda tarayıcı dışında hiçbir şey çalışmaz: sayfayı açın ve çalışmaya başlayın.
Donanım kilidi yok, kurulum yokLisans anahtarı, donanım kilidi ya da güncel tutulması gereken bir kurulum yoktur.
Telefonda, tablette ya da bilgisayardaGüncel her tarayıcıda aynı modül; ekran düzeni cihaza göre uyarlanır.

Questions about the Pile in clay module

What does the GeoTerva Pile in clay module calculate?

Point and skin resistance of a single pile in undrained clay. The point bearing by Meyerhof, Vesic or Reese & O’Neill and the skin friction by the α, λ or β method in layered clay. Each layer carries its own cu, and the adhesion factor is shown for every layer.

What do I enter in the Pile in clay module?

Pile geometry; clay layers with γ and cu; water table; and methods for the point and the shaft, factor of safety.

What results does the Pile in clay module give?

Qp, Qs, Qu and Qall; α, λ or β with its numbers, layer by layer; skin friction down the pile; and the resistance diagrams. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile in clay module use?

α method; λ method; β method; and reese & O’Neill.

How much does the Pile in clay module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile in clay module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.