GeoTerva Free for 7 days

Braced cut in sand module

Apparent pressure, struts, wales and sheeting in sand.

Every module is free to open for 7 days with a free account.This one also opens with no account at all, on a worked example: try the free demo.

Peck’s envelope for sand with the water table below or above the base, the strut loads from the hinged spans, and the section moduli of the sheeting and the wales. When the cut is dewatered the factor of safety against piping is checked.

You enter

  • Cut depth and width
  • Sand γ and φ′, water table
  • Strut levels and spacing
  • Steel grades and code

You get

  • The pressure envelope
  • The load of every strut
  • Sheeting and wale sections
  • Factor of safety against piping
Braced Cuts · Braced cut in sand
Braced cut in sand module: its screens on the worked example, the model, the results, the calculations and the theory

The drawing and the verdict after Analyze.

Go further

More modules in Braced Cuts

Why it is easy to use

Online, in your browserNothing runs on your machine but the browser: open the page and work.
No dongle, nothing to installNo licence key, no hardware lock, no installation to keep up to date.
On a phone, a tablet or a PCThe same module in any current browser, with the screen laid out for the device.

Questions about the Braced cut in sand module

What does the GeoTerva Braced cut in sand module calculate?

Apparent pressure, struts, wales and sheeting in sand. Peck’s envelope for sand with the water table below or above the base, the strut loads from the hinged spans, and the section moduli of the sheeting and the wales. When the cut is dewatered the factor of safety against piping is checked.

What do I enter in the Braced cut in sand module?

Cut depth and width; sand γ and φ′, water table; strut levels and spacing; and steel grades and code.

What results does the Braced cut in sand module give?

The pressure envelope; the load of every strut; sheeting and wale sections; and factor of safety against piping. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Braced cut in sand module use?

Peck (1969); EN 1993-1-1; and AISC 360-22.

How much does the Braced cut in sand module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Braced cut in sand module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.