GeoTerva Free for 7 days

Braced cut in sand over clay module

A sand layer over clay, reduced to one equivalent clay.

Every module is free to open for 7 days with a free account.Eleven modules open with no account at all, on a worked example: try them.

Sand above clay inside the cut is reduced to one equivalent clay by Peck’s method, and the envelope follows from the stability number. Strut loads, sections and bottom heave are checked as in the clay module.

You enter

  • Sand and clay layers
  • Cut geometry
  • Struts
  • Steel grades and code

You get

  • The equivalent clay
  • Envelope and strut loads
  • Sections
  • Bottom heave
Braced Cuts · Sand over clay
Braced cut in sand over clay module: its screens on the worked example, the model, the results, the calculations and the theory

The drawing and the verdict after Analyze.

Go further

More modules in Braced Cuts

Why it is easy to use

Online, in your browserNothing runs on your machine but the browser: open the page and work.
No dongle, nothing to installNo licence key, no hardware lock, no installation to keep up to date.
On a phone, a tablet or a PCThe same module in any current browser, with the screen laid out for the device.

Questions about the Sand over clay module

What does the GeoTerva Sand over clay module calculate?

A sand layer over clay, reduced to one equivalent clay. Sand above clay inside the cut is reduced to one equivalent clay by Peck’s method, and the envelope follows from the stability number. Strut loads, sections and bottom heave are checked as in the clay module.

What do I enter in the Sand over clay module?

Sand and clay layers; cut geometry; struts; and steel grades and code.

What results does the Sand over clay module give?

The equivalent clay; envelope and strut loads; sections; and bottom heave. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Sand over clay module use?

Peck (1943, 1969).

How much does the Sand over clay module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Sand over clay module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.