
Retaining wall modules
Cantilever, gravity and reinforced-soil (MSE) walls: stability and bearing, static and seismic.
A reinforced-concrete cantilever wall, a gravity wall in stone masonry or plain concrete, and a mechanically stabilized earth wall of granular fill reinforced by steel strips, geotextile or geogrid. The first two work out the static and the seismic earth pressure on the wall, the water, the surcharges and the passive resistance, then check sliding, overturning, eccentricity and bearing with every force in a ledger you can follow; the third checks every reinforcement level for rupture and pullout and the reinforced block for the same external checks, with the earthquake.
Runs the way you work
The 3 modules of this pack
Cantilever RC wall
Stability, bearing and stem actions of a reinforced-concrete cantilever wall.
Read moreGravity wall
A stone masonry or plain concrete gravity wall on a stepped footing.
Read moreMSE wall
A reinforced-soil wall: every level checked for rupture and pullout, the block for sliding, overturning and bearing, with the earthquake.
Read moreGo further
Other Retaining & excavation packs

Sheet-Pile Walls
Embedment, anchor forces and the steel section of a sheet-pile wall.
3 modules
Braced Cuts
Strut loads, wales and sheeting of a strutted excavation.
3 modules
Lateral Earth Pressure
At-rest, active and passive pressure on a wall, static and seismic.
7 modules
Surcharge Loads
The lateral pressure on a wall from loads on the ground behind it.
7 modulesQuestions about the Retaining Walls pack
Which modules are in the GeoTerva Retaining Walls pack?
3 modules: Cantilever RC wall; gravity wall; and MSE wall. A reinforced-concrete cantilever wall, a gravity wall in stone masonry or plain concrete, and a mechanically stabilized earth wall of granular fill reinforced by steel strips, geotextile or geogrid. The first two work out the static and the seismic earth pressure on the wall, the water, the surcharges and the passive resistance, then check sliding, overturning, eccentricity and bearing with every force in a ledger you can follow; the third checks every reinforcement level for rupture and pullout and the reinforced block for the same external checks, with the earthquake.
How much does the Retaining Walls pack cost?
$299 a year or $30 a month, per user, in US dollars without sales tax. The Retaining & excavation bundle, with every pack of the discipline, costs $799 a year. A full refund is given in the first 14 days of the first payment.
Can I try the Retaining Walls modules before I buy?
Yes. A free account opens all of them for 7 days, on screen, with no card; the theory pages are free to read with no account.