GeoTerva 7 gün ücretsiz dene

Kumda destekli kazı modülü

Kumda görünür basınç, destekler, kuşaklar ve kaplama.

Ücretsiz bir hesapla her modül 7 gün boyunca ücretsiz açılır.Bu modül ayrıca hiç hesap gerekmeden çözümlü bir örnekle de açılır: ücretsiz demoyu deneyin.

Yeraltı su seviyesi kazı tabanının altında ya da üstünde iken kum için Peck zarfı, mafsallı açıklıklardan elde edilen destek yükleri ve kaplama ile kuşakların mukavemet momentleri. Kazıda su düşürüldüğünde borulanmaya karşı güvenlik sayısı kontrol edilir.

Girdiler

  • Kazı derinliği ve genişliği
  • Kum γ ve φ′, yeraltı su seviyesi
  • Destek seviyeleri ve aralıkları
  • Çelik sınıfları ve yönetmelik

Çıktılar

  • Basınç zarfı
  • Her desteğin yükü
  • Kaplama ve kuşak kesitleri
  • Borulanmaya karşı güvenlik sayısı
Destekli kazılar · Kumda destekli kazı
Kumda destekli kazı modülü: çözümlü örnek üzerindeki ekranları — model, sonuçlar, hesaplar ve teori

Analizden sonra çizim ve karar.

Daha fazlası

Destekli kazılar paketindeki diğer modüller

Kullanımı neden kolay

Çevrim içi, tarayıcınızdaBilgisayarınızda tarayıcı dışında hiçbir şey çalışmaz: sayfayı açın ve çalışmaya başlayın.
Donanım kilidi yok, kurulum yokLisans anahtarı, donanım kilidi ya da güncel tutulması gereken bir kurulum yoktur.
Telefonda, tablette ya da bilgisayardaGüncel her tarayıcıda aynı modül; ekran düzeni cihaza göre uyarlanır.

Questions about the Braced cut in sand module

What does the GeoTerva Braced cut in sand module calculate?

Apparent pressure, struts, wales and sheeting in sand. Peck’s envelope for sand with the water table below or above the base, the strut loads from the hinged spans, and the section moduli of the sheeting and the wales. When the cut is dewatered the factor of safety against piping is checked.

What do I enter in the Braced cut in sand module?

Cut depth and width; sand γ and φ′, water table; strut levels and spacing; and steel grades and code.

What results does the Braced cut in sand module give?

The pressure envelope; the load of every strut; sheeting and wale sections; and factor of safety against piping. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Braced cut in sand module use?

Peck (1969); EN 1993-1-1; and AISC 360-22.

How much does the Braced cut in sand module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Braced cut in sand module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.