GeoTerva 7 gün ücretsiz dene

Kil üzerinde kumda destekli kazı modülü

Kil üzerindeki kum tabakası, tek bir eşdeğer kile indirgenir.

Ücretsiz bir hesapla her modül 7 gün boyunca ücretsiz açılır.On bir modül ise hiç hesap gerekmeden çözümlü bir örnekle açılır: deneyin.

Kazı içinde kilin üzerinde bulunan kum, Peck yöntemiyle tek bir eşdeğer kile indirgenir ve basınç zarfı stabilite sayısından belirlenir. Destek yükleri, kesitler ve taban kabarması kil modülündeki gibi kontrol edilir.

Girdiler

  • Kum ve kil tabakaları
  • Kazı geometrisi
  • Destekler
  • Çelik sınıfları ve yönetmelik

Çıktılar

  • Eşdeğer kil
  • Basınç zarfı ve destek yükleri
  • Kesitler
  • Taban kabarması
Destekli kazılar · Kil üzerinde kum
Kil üzerinde kumda destekli kazı modülü: çözümlü örnek üzerindeki ekranları — model, sonuçlar, hesaplar ve teori

Analizden sonra çizim ve karar.

Daha fazlası

Destekli kazılar paketindeki diğer modüller

Kullanımı neden kolay

Çevrim içi, tarayıcınızdaBilgisayarınızda tarayıcı dışında hiçbir şey çalışmaz: sayfayı açın ve çalışmaya başlayın.
Donanım kilidi yok, kurulum yokLisans anahtarı, donanım kilidi ya da güncel tutulması gereken bir kurulum yoktur.
Telefonda, tablette ya da bilgisayardaGüncel her tarayıcıda aynı modül; ekran düzeni cihaza göre uyarlanır.

Questions about the Sand over clay module

What does the GeoTerva Sand over clay module calculate?

A sand layer over clay, reduced to one equivalent clay. Sand above clay inside the cut is reduced to one equivalent clay by Peck’s method, and the envelope follows from the stability number. Strut loads, sections and bottom heave are checked as in the clay module.

What do I enter in the Sand over clay module?

Sand and clay layers; cut geometry; struts; and steel grades and code.

What results does the Sand over clay module give?

The equivalent clay; envelope and strut loads; sections; and bottom heave. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Sand over clay module use?

Peck (1943, 1969).

How much does the Sand over clay module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Sand over clay module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.