GeoTerva 7 gün ücretsiz dene

Kilde destekli kazı modülü

Yumuşaktan katıya kil; kazı tabanının kabarmasıyla birlikte.

Ücretsiz bir hesapla her modül 7 gün boyunca ücretsiz açılır.On bir modül ise hiç hesap gerekmeden çözümlü bir örnekle açılır: deneyin.

Stabilite sayısına göre yumuşak–orta ya da katı kil için seçilen basınç zarfı; destek yükleri, kaplama ve kuşaklar; ilk destek seviyesinde çekme çatlağı kontrolü ve taban kabarmasına karşı güvenlik sayısı.

Girdiler

  • Kazı geometrisi
  • Kil γ ve cu
  • Destekler
  • Çelik sınıfları ve yönetmelik

Çıktılar

  • Basınç zarfı
  • Destek yükleri
  • Kesitler
  • Taban kabarmasına karşı güvenlik sayısı
Destekli kazılar · Kilde destekli kazı
Kilde destekli kazı modülü: çözümlü örnek üzerindeki ekranları — model, sonuçlar, hesaplar ve teori

Analizden sonra çizim ve karar.

Daha fazlası

Destekli kazılar paketindeki diğer modüller

Kullanımı neden kolay

Çevrim içi, tarayıcınızdaBilgisayarınızda tarayıcı dışında hiçbir şey çalışmaz: sayfayı açın ve çalışmaya başlayın.
Donanım kilidi yok, kurulum yokLisans anahtarı, donanım kilidi ya da güncel tutulması gereken bir kurulum yoktur.
Telefonda, tablette ya da bilgisayardaGüncel her tarayıcıda aynı modül; ekran düzeni cihaza göre uyarlanır.

Questions about the Braced cut in clay module

What does the GeoTerva Braced cut in clay module calculate?

Soft to stiff clay, with the bottom heave of the cut. The envelope for soft to medium or stiff clay chosen from the stability number, the strut loads, the sheeting and the wales, a check of the tension crack at the first strut and the factor of safety against bottom heave.

What do I enter in the Braced cut in clay module?

Cut geometry; clay γ and cu; struts; and steel grades and code.

What results does the Braced cut in clay module give?

The pressure envelope; strut loads; sections; and bottom heave factor of safety. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Braced cut in clay module use?

Peck (1969).

How much does the Braced cut in clay module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Braced cut in clay module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.