GeoTerva Free for 7 days

Pile group module

The load on every pile, the group effect, the settlement and the lateral response of a group in layered ground.

Every module is free to open for 7 days with a free account.Eleven modules open with no account at all, on a worked example: try them.

A group of vertical piles under a rigid cap, in up to eight layers of sand and clay. The cap load is shared among the piles; the capacity is worked out as individual piles, each layer with the efficiency of its own soil, and as a block, and the lesser governs; the settlement is the elastic settlement of the group and the consolidation of the clay below 2L/3; and under a lateral load the rows share it unequally, by p-multipliers on the p–y curves of the layers.

You enter

  • Rows and piles, spacing, section and length
  • Up to eight layers, sand or clay
  • Water table
  • Vertical load, lateral load and moments on the cap

You get

  • The load on every pile, in compression and tension
  • Efficiency, block capacity and the allowable load
  • Elastic and consolidation settlement
  • The deflection of the cap and the load of every row
Piles · Pile group
Pile group module: its screens on the worked example, the model, the results, the calculations and the theory

The drawing and the verdict after Analyze.

Go further

More modules in Piles

Why it is easy to use

Online, in your browserNothing runs on your machine but the browser: open the page and work.
No dongle, nothing to installNo licence key, no hardware lock, no installation to keep up to date.
On a phone, a tablet or a PCThe same module in any current browser, with the screen laid out for the device.

Questions about the Pile group module

What does the GeoTerva Pile group module calculate?

The load on every pile, the group effect, the settlement and the lateral response of a group in layered ground. A group of vertical piles under a rigid cap, in up to eight layers of sand and clay. The cap load is shared among the piles; the capacity is worked out as individual piles, each layer with the efficiency of its own soil, and as a block, and the lesser governs; the settlement is the elastic settlement of the group and the consolidation of the clay below 2L/3; and under a lateral load the rows share it unequally, by p-multipliers on the p–y curves of the layers.

What do I enter in the Pile group module?

Rows and piles, spacing, section and length; up to eight layers, sand or clay; water table; and vertical load, lateral load and moments on the cap.

What results does the Pile group module give?

The load on every pile, in compression and tension; efficiency, block capacity and the allowable load; elastic and consolidation settlement; and the deflection of the cap and the load of every row. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile group module use?

Converse–Labarre; kishida–Meyerhof, AASHTO; block failure; and p-multipliers.

How much does the Pile group module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile group module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.