GeoTerva Free for 7 days

Pile capacity in clay module

Point and skin resistance of a single pile in undrained clay.

Every module is free to open for 7 days with a free account.Eleven modules open with no account at all, on a worked example: try them.

The point bearing by Meyerhof, Vesic or Reese & O’Neill and the skin friction by the α, λ or β method in layered clay. Each layer carries its own cu, and the adhesion factor is shown for every layer.

You enter

  • Pile geometry
  • Clay layers with γ and cu
  • Water table
  • Methods for the point and the shaft, factor of safety

You get

  • Qp, Qs, Qu and Qall
  • α, λ or β with its numbers, layer by layer
  • Skin friction down the pile
  • The resistance diagrams
Piles · Pile in clay
Pile capacity in clay module: its screens on the worked example, the model, the results, the calculations and the theory

The drawing and the verdict after Analyze.

Go further

More modules in Piles

Why it is easy to use

Online, in your browserNothing runs on your machine but the browser: open the page and work.
No dongle, nothing to installNo licence key, no hardware lock, no installation to keep up to date.
On a phone, a tablet or a PCThe same module in any current browser, with the screen laid out for the device.

Questions about the Pile in clay module

What does the GeoTerva Pile in clay module calculate?

Point and skin resistance of a single pile in undrained clay. The point bearing by Meyerhof, Vesic or Reese & O’Neill and the skin friction by the α, λ or β method in layered clay. Each layer carries its own cu, and the adhesion factor is shown for every layer.

What do I enter in the Pile in clay module?

Pile geometry; clay layers with γ and cu; water table; and methods for the point and the shaft, factor of safety.

What results does the Pile in clay module give?

Qp, Qs, Qu and Qall; α, λ or β with its numbers, layer by layer; skin friction down the pile; and the resistance diagrams. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile in clay module use?

α method; λ method; β method; and reese & O’Neill.

How much does the Pile in clay module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile in clay module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.