GeoTerva 7 Tage kostenlos
Gründungen · 5 Module

Pfahlmodule

Einzelpfahl und Pfahlgruppe: axiale Tragfähigkeit, Verhalten unter Horizontallast und Gruppenwirkung.

Fünf Module. Drei liefern die axiale Tragfähigkeit eines Einzelpfahls in Sand, in Ton oder in einer Schichtenfolge: Spitzenwiderstand und Mantelreibung nach dem jeweils von Ihnen gewählten Verfahren, entlang des Pfahls dargestellt, als Grenz- und zulässige Tragfähigkeit mit den Anteilen von Spitze und Mantel. Das vierte belastet den Pfahl horizontal und liefert Verschiebung, Moment und Querkraft entlang des Pfahls in geschichtetem Baugrund mithilfe von p–y-Kurven. Das fünfte behandelt eine Pfahlgruppe unter einer starren Pfahlkopfplatte: die Last jedes Pfahls, die Tragfähigkeit mit der Gruppenwirkung Schicht für Schicht, die Setzung und das Horizontalverhalten der Reihen.

Passt sich Ihrer Arbeitsweise an

Online, in Ihrem BrowserAuf Ihrem Gerät läuft nur der Browser: Seite öffnen und arbeiten.
Kein Dongle, keine InstallationKein Lizenzschlüssel, kein Hardware-Kopierschutz, keine Installation, die aktuell gehalten werden muss.
Auf Smartphone, Tablet oder PCDasselbe Modul in jedem aktuellen Browser, mit einer an das Gerät angepassten Bildschirmaufteilung.

Die 5 Module dieses Pakets

Weiterführend

Weitere Pakete im Bereich Gründungen

Questions about the Piles pack

Which modules are in the GeoTerva Piles pack?

5 modules: Pile in sand; pile in clay; pile on layered soil; pile under lateral load; and pile group. Five modules. Three give the axial capacity of a single pile in sand, in clay or through a stack of layers: the point resistance and the skin friction by the method you pick for each, drawn along the pile, as the ultimate and the allowable capacity with the share of the tip and of the shaft. The fourth loads the pile sideways and gives the deflection, the moment and the shear along it in layered ground, by p–y curves. The fifth takes a group of piles under a rigid cap: the load on every pile, the capacity with the effect of the group layer by layer, the settlement and the lateral response of the rows.

How much does the Piles pack cost?

$349 a year or $35 a month, per user, in US dollars without sales tax. The Foundations bundle, with every pack of the discipline, costs $579 a year. A full refund is given in the first 14 days of the first payment.

Can I try the Piles modules before I buy?

Yes. A free account opens all of them for 7 days, on screen, with no card; the theory pages are free to read with no account.