GeoTerva 7 Tage kostenlos

Modul Pfahltragfähigkeit in Sand

Spitzenwiderstand und Mantelreibung eines in Sand gerammten Einzelpfahls.

Mit einem kostenlosen Konto lässt sich jedes Modul 7 Tage lang kostenlos öffnen.Elf Module lassen sich ganz ohne Konto an einem Rechenbeispiel öffnen: jetzt ausprobieren.

Der Spitzenwiderstand nach Meyerhof, Vesic oder Coyle & Castello und die Mantelreibung nach dem K–δ-Verfahren oder nach Coyle & Castello, jeweils unabhängig voneinander wählbar. Die wirksame Spannung entlang des Pfahlschafts berücksichtigt den Grundwasserspiegel und die kritische Tiefe.

Sie geben ein

  • Pfahllänge, quadratischer oder kreisförmiger Querschnitt
  • Sandschichten mit γ und φ′
  • Grundwasserspiegel
  • Verfahren für Spitze und Schaft, Sicherheitsfaktor

Sie erhalten

  • Qp, Qs, Qu und Qall
  • Spezifische Mantelreibung entlang des Pfahls
  • Der Verlauf der wirksamen Spannung
  • Eine 3D-Ansicht des Pfahls im Baugrund
Pfähle · Pfahl in Sand
Modul Pfahltragfähigkeit in Sand: die Bildschirme am Rechenbeispiel – Modell, Ergebnisse, Berechnungen und Theorie

Zeichnung und Nachweisergebnis nach dem Berechnen.

Weiterführend

Weitere Module im Bereich Pfähle

Warum die Bedienung einfach ist

Online, in Ihrem BrowserAuf Ihrem Gerät läuft nur der Browser: Seite öffnen und arbeiten.
Kein Dongle, keine InstallationKein Lizenzschlüssel, kein Hardware-Kopierschutz, keine Installation, die aktuell gehalten werden muss.
Auf Smartphone, Tablet oder PCDasselbe Modul in jedem aktuellen Browser, mit einer an das Gerät angepassten Bildschirmaufteilung.

Questions about the Pile in sand module

What does the GeoTerva Pile in sand module calculate?

Point and skin resistance of a single pile driven into sand. The point bearing by Meyerhof, Vesic or Coyle & Castello and the skin friction by the K–δ method or by Coyle & Castello, each chosen on its own. The effective stress along the shaft follows the water table and the critical depth.

What do I enter in the Pile in sand module?

Pile length, square or circular section; sand layers with γ and φ′; water table; and methods for the point and the shaft, factor of safety.

What results does the Pile in sand module give?

Qp, Qs, Qu and Qall; unit skin friction down the pile; the effective stress profile; and A 3D view of the pile in the ground. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile in sand module use?

Meyerhof; vesic; and coyle & Castello.

How much does the Pile in sand module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile in sand module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.