GeoTerva 7 Tage kostenlos

Modul Horizontal belasteter Pfahl (p–y-Kurven)

Horizontalverschiebung, Moment und Querkraft entlang eines Pfahls in geschichtetem Baugrund, mit p–y-Kurven.

Mit einem kostenlosen Konto lässt sich jedes Modul 7 Tage lang kostenlos öffnen.Elf Module lassen sich ganz ohne Konto an einem Rechenbeispiel öffnen: jetzt ausprobieren.

Ein Einzelpfahl, am Pfahlkopf horizontal belastet, in bis zu acht Sand- oder Tonschichten. Der Baugrund wirkt über die p–y-Kurven nach API RP 2A für Sand und nach Matlock für Ton, statisch oder zyklisch, oder über eine elastische Bettung. Der Pfahlkopf ist frei drehbar oder gegen Verdrehung gehalten, die Last darf oberhalb der Geländeoberfläche angreifen, und eine Axiallast wirkt über die verformte Biegelinie.

Sie geben ein

  • Pfahlquerschnitt, Länge und freie Länge
  • Bis zu acht Schichten, Sand oder Ton
  • Grundwasserspiegel
  • Last, Moment und Axiallast am Pfahlkopf

Sie erhalten

  • Verschiebung, Verdrehung, Moment, Querkraft und Bodenreaktion entlang des Pfahls
  • Die p–y-Kurven in fünf Tiefen
  • Die Last-Verschiebungs-Kurve
  • Die Last bei zulässiger Verschiebung oder zulässigem Moment
Pfähle · Horizontal belasteter Pfahl
Modul Horizontal belasteter Pfahl (p–y-Kurven): die Bildschirme am Rechenbeispiel – Modell, Ergebnisse, Berechnungen und Theorie

Zeichnung und Nachweisergebnis nach dem Berechnen.

Weiterführend

Weitere Module im Bereich Pfähle

Warum die Bedienung einfach ist

Online, in Ihrem BrowserAuf Ihrem Gerät läuft nur der Browser: Seite öffnen und arbeiten.
Kein Dongle, keine InstallationKein Lizenzschlüssel, kein Hardware-Kopierschutz, keine Installation, die aktuell gehalten werden muss.
Auf Smartphone, Tablet oder PCDasselbe Modul in jedem aktuellen Browser, mit einer an das Gerät angepassten Bildschirmaufteilung.

Questions about the Pile under lateral load module

What does the GeoTerva Pile under lateral load module calculate?

Deflection, moment and shear along a pile in layered ground, by p–y curves. A single pile loaded sideways at its head, in up to eight layers of sand or clay. The ground reacts through the p–y curves of API RP 2A for sand and of Matlock for clay, static or cyclic, or through an elastic subgrade reaction. The head is free or held against rotation, the load may act above the ground, and an axial load acts through the deflected shape.

What do I enter in the Pile under lateral load module?

Pile section, length and free length; up to eight layers, sand or clay; water table; and load, moment and axial load at the head.

What results does the Pile under lateral load module give?

Deflection, rotation, moment, shear and soil reaction along the pile; the p–y curves at five depths; the load–deflection curve; and the load at an allowable deflection or moment. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile under lateral load module use?

API sand curve; matlock clay curve; and elastic subgrade reaction.

How much does the Pile under lateral load module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile under lateral load module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.