GeoTerva 7 Tage kostenlos

Modul Pfahlgruppe

Die Last auf jedem Pfahl, die Gruppenwirkung, die Setzung und das Horizontalverhalten einer Gruppe in geschichtetem Baugrund.

Mit einem kostenlosen Konto lässt sich jedes Modul 7 Tage lang kostenlos öffnen.Elf Module lassen sich ganz ohne Konto an einem Rechenbeispiel öffnen: jetzt ausprobieren.

Eine Gruppe vertikaler Pfähle unter einer starren Pfahlkopfplatte in bis zu acht Sand- und Tonschichten. Die Last der Pfahlkopfplatte wird auf die Pfähle verteilt; die Tragfähigkeit wird als Summe der Einzelpfähle – jede Schicht mit dem Gruppenwirkungsgrad ihres eigenen Bodens – und als Block ermittelt, wobei der kleinere Wert maßgebend ist; die Setzung setzt sich aus der elastischen Setzung der Gruppe und der Konsolidation des Tons unterhalb von 2L/3 zusammen; unter Horizontallast tragen die Reihen ungleich, über p-Multiplikatoren auf die p–y-Kurven der Schichten.

Sie geben ein

  • Reihen und Pfähle, Abstände, Querschnitt und Länge
  • Bis zu acht Schichten, Sand oder Ton
  • Grundwasserspiegel
  • Vertikallast, Horizontallast und Momente auf die Pfahlkopfplatte

Sie erhalten

  • Die Last jedes Pfahls, auf Druck und Zug
  • Gruppenwirkungsgrad, Blocktragfähigkeit und zulässige Last
  • Elastische Setzung und Konsolidationssetzung
  • Die Horizontalverschiebung der Pfahlkopfplatte und die Last jeder Reihe
Pfähle · Pfahlgruppe
Modul Pfahlgruppe: die Bildschirme am Rechenbeispiel – Modell, Ergebnisse, Berechnungen und Theorie

Zeichnung und Nachweisergebnis nach dem Berechnen.

Weiterführend

Weitere Module im Bereich Pfähle

Warum die Bedienung einfach ist

Online, in Ihrem BrowserAuf Ihrem Gerät läuft nur der Browser: Seite öffnen und arbeiten.
Kein Dongle, keine InstallationKein Lizenzschlüssel, kein Hardware-Kopierschutz, keine Installation, die aktuell gehalten werden muss.
Auf Smartphone, Tablet oder PCDasselbe Modul in jedem aktuellen Browser, mit einer an das Gerät angepassten Bildschirmaufteilung.

Questions about the Pile group module

What does the GeoTerva Pile group module calculate?

The load on every pile, the group effect, the settlement and the lateral response of a group in layered ground. A group of vertical piles under a rigid cap, in up to eight layers of sand and clay. The cap load is shared among the piles; the capacity is worked out as individual piles, each layer with the efficiency of its own soil, and as a block, and the lesser governs; the settlement is the elastic settlement of the group and the consolidation of the clay below 2L/3; and under a lateral load the rows share it unequally, by p-multipliers on the p–y curves of the layers.

What do I enter in the Pile group module?

Rows and piles, spacing, section and length; up to eight layers, sand or clay; water table; and vertical load, lateral load and moments on the cap.

What results does the Pile group module give?

The load on every pile, in compression and tension; efficiency, block capacity and the allowable load; elastic and consolidation settlement; and the deflection of the cap and the load of every row. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile group module use?

Converse–Labarre; kishida–Meyerhof, AASHTO; block failure; and p-multipliers.

How much does the Pile group module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile group module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.