GeoTerva Free for 7 days

Hansen bearing capacity module

One equation for sloping ground, a tilted base and an inclined load.

Every module is free to open for 7 days with a free account.Eleven modules open with no account at all, on a worked example: try them.

Hansen’s equation covers the three corrections that the classical equations leave out: a footing near a slope, a base that is not horizontal and a load that is not vertical. Hansen’s own Nγ is used, and every factor is written out.

You enter

  • Footing geometry and depth
  • Ground slope and base tilt
  • Load inclination
  • Soil strength, water table, factor of safety

You get

  • qu and qall
  • Shape, depth, inclination, base and ground factors
  • The section with the slope and the tilt
  • The check against the applied pressure
Bearing Capacity · Hansen
Hansen bearing capacity module: its screens on the worked example, the model, the results, the calculations and the theory

The drawing and the verdict after Analyze.

Go further

More modules in Bearing Capacity

Why it is easy to use

Online, in your browserNothing runs on your machine but the browser: open the page and work.
No dongle, nothing to installNo licence key, no hardware lock, no installation to keep up to date.
On a phone, a tablet or a PCThe same module in any current browser, with the screen laid out for the device.

Questions about the Hansen module

What does the GeoTerva Hansen module calculate?

One equation for sloping ground, a tilted base and an inclined load. Hansen’s equation covers the three corrections that the classical equations leave out: a footing near a slope, a base that is not horizontal and a load that is not vertical. Hansen’s own Nγ is used, and every factor is written out.

What do I enter in the Hansen module?

Footing geometry and depth; ground slope and base tilt; load inclination; and soil strength, water table, factor of safety.

What results does the Hansen module give?

qu and qall; shape, depth, inclination, base and ground factors; the section with the slope and the tilt; and the check against the applied pressure. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Hansen module use?

Hansen (1970).

How much does the Hansen module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Bearing Capacity pack (5 modules): $199 a year or $20 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Hansen module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.