GeoTerva 7 dagen gratis

Module paalgroep

De belasting op elke paal, het groepseffect, de zetting en de dwarskrachtresponsie van een paalgroep in gelaagde grond.

Elke module is met een gratis account 7 dagen gratis te openen.Elf modules zijn zonder account direct te proberen met een rekenvoorbeeld: probeer ze uit.

Een groep verticale palen onder een stijve poer, in maximaal acht lagen zand en klei. De poerbelasting wordt verdeeld over de palen; het draagvermogen wordt berekend als individuele palen, waarbij elke laag de efficiëntie van haar eigen grond heeft, én als een blok, waarbij de kleinste waarde maatgevend is; de zetting is de directe (elastische) zetting van de groep en de consolidatiezetting van de klei onder 2L/3; en bij een dwarsbelasting verdelen de rijen deze ongelijk, via p-vermenigvuldigingsfactoren op de p–y-krommen van de lagen.

U voert in

  • Rijen en palen, h.o.h.-afstand, doorsnede en lengte
  • Tot acht lagen, zand of klei
  • Grondwaterstand
  • Verticale belasting, dwarsbelasting en momenten op de poer

U krijgt

  • De belasting op elke paal, in druk en trek
  • Efficiëntie, blokdraagvermogen en de toelaatbare belasting
  • Directe (elastische) zetting en consolidatiezetting
  • De verplaatsing van de poer en de belasting op elke rij
Paalfunderingen · Paalgroep
Module paalgroep: de schermen van het rekenvoorbeeld, het model, de resultaten, de berekeningen en de theorie

De tekening en het oordeel na Berekenen.

Verder lezen

Meer modules in Paalfunderingen

Waarom het eenvoudig in gebruik is

Online, in uw browserEr draait niets op uw computer behalve de browser: open de pagina en werk.
Geen dongle, niets te installerenGeen licentiesleutel, geen hardwareslot, geen installatie om bij te houden.
Op smartphone, tablet of pcDezelfde module in elke moderne browser, met een schermindeling afgestemd op het apparaat.

Questions about the Pile group module

What does the GeoTerva Pile group module calculate?

The load on every pile, the group effect, the settlement and the lateral response of a group in layered ground. A group of vertical piles under a rigid cap, in up to eight layers of sand and clay. The cap load is shared among the piles; the capacity is worked out as individual piles, each layer with the efficiency of its own soil, and as a block, and the lesser governs; the settlement is the elastic settlement of the group and the consolidation of the clay below 2L/3; and under a lateral load the rows share it unequally, by p-multipliers on the p–y curves of the layers.

What do I enter in the Pile group module?

Rows and piles, spacing, section and length; up to eight layers, sand or clay; water table; and vertical load, lateral load and moments on the cap.

What results does the Pile group module give?

The load on every pile, in compression and tension; efficiency, block capacity and the allowable load; elastic and consolidation settlement; and the deflection of the cap and the load of every row. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile group module use?

Converse–Labarre; kishida–Meyerhof, AASHTO; block failure; and p-multipliers.

How much does the Pile group module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile group module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.