GeoTerva 7 dagen gratis

Module dwarsbelaste paal (p–y-krommen)

Vormverandering, momenten en dwarskrachten langs een paal in gelaagde grond via p–y-krommen.

Elke module is met een gratis account 7 dagen gratis te openen.Elf modules zijn zonder account direct te proberen met een rekenvoorbeeld: probeer ze uit.

Een enkele paal die aan de kop zijdelings wordt belast, in maximaal acht lagen zand of klei. De grond reageert via de p–y-krommen van API RP 2A voor zand en van Matlock voor klei, statisch of cyclisch, of via een elastische beddingsconstante. De paalkop is vrij of verhinderd tegen rotatie, de belasting kan boven het maaiveld grijpen, en een axiale belasting werkt door via de vervormde vorm.

U voert in

  • Paaldoorsnede, lengte en vrije lengte
  • Tot acht lagen, zand of klei
  • Grondwaterstand
  • Belasting, moment en axiale belasting op de kop

U krijgt

  • Verplaatsing, rotatie, moment, dwarskracht en grondreactie langs de paal
  • De p–y-krommen op vijf diepten
  • De belasting-verplaatsingskromme
  • De belasting bij een toelaatbare verplaatsing of moment
Paalfunderingen · Paal onder dwarsbelasting
Module Paal onder dwarsbelasting (p–y-krommen): de schermen van het rekenvoorbeeld, het model, de resultaten, de berekeningen en de theorie

De tekening en het oordeel na Berekenen.

Verder lezen

Meer modules in Paalfunderingen

Waarom het eenvoudig in gebruik is

Online, in uw browserEr draait niets op uw computer behalve de browser: open de pagina en werk.
Geen dongle, niets te installerenGeen licentiesleutel, geen hardwareslot, geen installatie om bij te houden.
Op smartphone, tablet of pcDezelfde module in elke moderne browser, met een schermindeling afgestemd op het apparaat.

Questions about the Pile under lateral load module

What does the GeoTerva Pile under lateral load module calculate?

Deflection, moment and shear along a pile in layered ground, by p–y curves. A single pile loaded sideways at its head, in up to eight layers of sand or clay. The ground reacts through the p–y curves of API RP 2A for sand and of Matlock for clay, static or cyclic, or through an elastic subgrade reaction. The head is free or held against rotation, the load may act above the ground, and an axial load acts through the deflected shape.

What do I enter in the Pile under lateral load module?

Pile section, length and free length; up to eight layers, sand or clay; water table; and load, moment and axial load at the head.

What results does the Pile under lateral load module give?

Deflection, rotation, moment, shear and soil reaction along the pile; the p–y curves at five depths; the load–deflection curve; and the load at an allowable deflection or moment. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile under lateral load module use?

API sand curve; matlock clay curve; and elastic subgrade reaction.

How much does the Pile under lateral load module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile under lateral load module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.