GeoTerva 7 dagen gratis

Module voor gestempelde bouwput in zand op klei

Een zandlaag op klei, gereduceerd tot één equivalente kleilaag.

Elke module is met een gratis account 7 dagen gratis te openen.Elf modules zijn zonder account direct te proberen met een rekenvoorbeeld: probeer ze uit.

Zand boven klei binnen de ontgraving wordt volgens de methode van Peck gereduceerd tot één equivalente kleilaag, waarna het gronddrukdiagram volgt uit het stabiliteitsgetal. Stempelkrachten, profielen en bodemopbolling worden gecontroleerd zoals in de kleimodule.

U voert in

  • Zand- en kleilagen
  • Geometrie bouwput
  • Stempels
  • Staalkwaliteiten en normen

U krijgt

  • De equivalente kleilaag
  • Gronddrukdiagram en stempelkrachten
  • Doorsneden
  • Opbolling
Gestempelde bouwputten · Zand op klei
Module voor gestempelde bouwput in zand op klei: schermen van het rekenvoorbeeld, het model, de resultaten, de berekeningen en de theorie

De tekening en het oordeel na Berekenen.

Verder lezen

Meer modules in Gestempelde bouwputten

Waarom het eenvoudig in gebruik is

Online, in uw browserEr draait niets op uw computer behalve de browser: open de pagina en werk.
Geen dongle, niets te installerenGeen licentiesleutel, geen hardwareslot, geen installatie om bij te houden.
Op smartphone, tablet of pcDezelfde module in elke moderne browser, met een schermindeling afgestemd op het apparaat.

Questions about the Sand over clay module

What does the GeoTerva Sand over clay module calculate?

A sand layer over clay, reduced to one equivalent clay. Sand above clay inside the cut is reduced to one equivalent clay by Peck’s method, and the envelope follows from the stability number. Strut loads, sections and bottom heave are checked as in the clay module.

What do I enter in the Sand over clay module?

Sand and clay layers; cut geometry; struts; and steel grades and code.

What results does the Sand over clay module give?

The equivalent clay; envelope and strut loads; sections; and bottom heave. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Sand over clay module use?

Peck (1943, 1969).

How much does the Sand over clay module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Sand over clay module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.