GeoTerva 7 dagen gratis

Module voor gestempelde bouwput in klei

Zachte tot stijve klei, inclusief controle op bodemopbolling van de bouwput.

Elke module is met een gratis account 7 dagen gratis te openen.Elf modules zijn zonder account direct te proberen met een rekenvoorbeeld: probeer ze uit.

Het gronddrukdiagram voor zachte tot matig stijve of stijve klei, gekozen op basis van het stabiliteitsgetal, de stempelkrachten, de damwand en de gordingen, inclusief een controle van de trekscheur bij de eerste stempellaag en de veiligheidsfactor tegen bodemopbolling.

U voert in

  • Geometrie bouwput
  • Klei γ en cu
  • Stempels
  • Staalkwaliteiten en normen

U krijgt

  • Het gronddrukdiagram
  • Stempelkrachten
  • Doorsneden
  • Veiligheidsfactor tegen bodemopbolling
Gestempelde bouwputten · Gestempelde bouwput in klei
Module voor gestempelde bouwput in klei: schermen van het rekenvoorbeeld, het model, de resultaten, de berekeningen en de theorie

De tekening en het oordeel na Berekenen.

Verder lezen

Meer modules in Gestempelde bouwputten

Waarom het eenvoudig in gebruik is

Online, in uw browserEr draait niets op uw computer behalve de browser: open de pagina en werk.
Geen dongle, niets te installerenGeen licentiesleutel, geen hardwareslot, geen installatie om bij te houden.
Op smartphone, tablet of pcDezelfde module in elke moderne browser, met een schermindeling afgestemd op het apparaat.

Questions about the Braced cut in clay module

What does the GeoTerva Braced cut in clay module calculate?

Soft to stiff clay, with the bottom heave of the cut. The envelope for soft to medium or stiff clay chosen from the stability number, the strut loads, the sheeting and the wales, a check of the tension crack at the first strut and the factor of safety against bottom heave.

What do I enter in the Braced cut in clay module?

Cut geometry; clay γ and cu; struts; and steel grades and code.

What results does the Braced cut in clay module give?

The pressure envelope; strut loads; sections; and bottom heave factor of safety. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Braced cut in clay module use?

Peck (1969).

How much does the Braced cut in clay module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Braced cut in clay module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.