GeoTerva 7 dagen gratis

Module voor gestempelde bouwput in zand

Schijnbaar gronddrukdiagram, stempels, gordingen en damwand in zand.

Elke module is met een gratis account 7 dagen gratis te openen.Deze module is ook zonder account direct te proberen met een rekenvoorbeeld: probeer de gratis demo.

Pecks diagram voor zand met de grondwaterstand onder of boven het ontgravingsniveau, de stempelkrachten uit scharnierende overspanningen, en de weerstandsmomenten van de damwand en de gordingen. Wanneer de bouwput wordt drooggezet, wordt de veiligheidsfactor tegen piping gecontroleerd.

U voert in

  • Diepte en breedte van de bouwput
  • Zand γ en φ′, grondwaterstand
  • Stempelniveaus en h.o.h.-afstand
  • Staalkwaliteiten en normen

U krijgt

  • Het gronddrukdiagram
  • De belasting van elke stempel
  • Profielen voor damwand en gordingen
  • Veiligheidsfactor tegen piping
Gestempelde bouwputten · Gestempelde bouwput in zand
Module voor gestempelde bouwput in zand: schermen van het rekenvoorbeeld, het model, de resultaten, de berekeningen en de theorie

De tekening en het oordeel na Berekenen.

Verder lezen

Meer modules in Gestempelde bouwputten

Waarom het eenvoudig in gebruik is

Online, in uw browserEr draait niets op uw computer behalve de browser: open de pagina en werk.
Geen dongle, niets te installerenGeen licentiesleutel, geen hardwareslot, geen installatie om bij te houden.
Op smartphone, tablet of pcDezelfde module in elke moderne browser, met een schermindeling afgestemd op het apparaat.

Questions about the Braced cut in sand module

What does the GeoTerva Braced cut in sand module calculate?

Apparent pressure, struts, wales and sheeting in sand. Peck’s envelope for sand with the water table below or above the base, the strut loads from the hinged spans, and the section moduli of the sheeting and the wales. When the cut is dewatered the factor of safety against piping is checked.

What do I enter in the Braced cut in sand module?

Cut depth and width; sand γ and φ′, water table; strut levels and spacing; and steel grades and code.

What results does the Braced cut in sand module give?

The pressure envelope; the load of every strut; sheeting and wale sections; and factor of safety against piping. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Braced cut in sand module use?

Peck (1969); EN 1993-1-1; and AISC 360-22.

How much does the Braced cut in sand module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Braced cut in sand module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.