GeoTerva 7 दिनों के लिए निःशुल्क

रेत में पाइल क्षमता मॉड्यूल

रेत में धंसाई गई एकल पाइल का सिरा और पार्श्व घर्षण प्रतिरोध।

प्रत्येक मॉड्यूल निःशुल्क खाते के साथ 7 दिनों के लिए खोलने हेतु निःशुल्क है। एक हल किए गए उदाहरण पर, बिना किसी खाते के भी ग्यारह मॉड्यूल खुलते हैं: उन्हें आज़माएं।

Meyerhof, Vesic या Coyle & Castello द्वारा सिरा धारण (point bearing) और K–δ विधि या Coyle & Castello द्वारा पार्श्व घर्षण, प्रत्येक को स्वतंत्र रूप से चुना जाता है। शाफ्ट के साथ प्रभावी प्रतिबल जल स्तर और क्रांतिक गहराई का पालन करता है।

आप दर्ज करते हैं

  • पाइल की लंबाई, वर्गाकार या वृत्ताकार काट
  • γ और φ′ वाली रेत की परतें
  • जल स्तर
  • सिरे और शाफ्ट के लिए विधियाँ, सुरक्षा गुणांक

आपको मिलता है

  • Qp, Qs, Qu और Qall
  • पाइल की लंबाई के साथ इकाई पार्श्व घर्षण
  • प्रभावी प्रतिबल प्रोफ़ाइल
  • भूमि में पाइल का 3D दृश्य
पाइल · रेत में पाइल
रेत में पाइल क्षमता मॉड्यूल: हल किए गए उदाहरण, मॉडल, परिणाम, गणना और सिद्धांत की इसकी स्क्रीन

विश्लेषण के बाद आरेख और निर्णय।

आगे बढ़ें

पाइल में अधिक मॉड्यूल

यह उपयोग में आसान क्यों है

ऑनलाइन, आपके ब्राउज़र मेंआपके कंप्यूटर पर ब्राउज़र के अलावा कुछ नहीं चलता: पेज खोलें और काम करें।
कोई डोंगल नहीं, कुछ भी इंस्टॉल करने की आवश्यकता नहींकोई लाइसेंस कुंजी नहीं, कोई हार्डवेयर लॉक नहीं, अद्यतन रखने के लिए कोई इंस्टॉलेशन नहीं।
फ़ोन, टैबलेट या पीसी परकिसी भी वर्तमान ब्राउज़र में वही मॉड्यूल, डिवाइस के लिए व्यवस्थित स्क्रीन लेआउट के साथ।

Questions about the Pile in sand module

What does the GeoTerva Pile in sand module calculate?

Point and skin resistance of a single pile driven into sand. The point bearing by Meyerhof, Vesic or Coyle & Castello and the skin friction by the K–δ method or by Coyle & Castello, each chosen on its own. The effective stress along the shaft follows the water table and the critical depth.

What do I enter in the Pile in sand module?

Pile length, square or circular section; sand layers with γ and φ′; water table; and methods for the point and the shaft, factor of safety.

What results does the Pile in sand module give?

Qp, Qs, Qu and Qall; unit skin friction down the pile; the effective stress profile; and A 3D view of the pile in the ground. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile in sand module use?

Meyerhof; vesic; and coyle & Castello.

How much does the Pile in sand module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile in sand module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.