GeoTerva 7 दिनों के लिए निःशुल्क

परतदार मृदा में पाइल क्षमता मॉड्यूल

शाफ्ट के साथ रेत और मृत्तिका की परतें, प्रत्येक अपनी विधि के साथ।

प्रत्येक मॉड्यूल निःशुल्क खाते के साथ 7 दिनों के लिए खोलने हेतु निःशुल्क है। यह मॉड्यूल एक हल किए गए उदाहरण पर, बिना किसी खाते के भी खुलता है: निःशुल्क डेमो आज़माएं।

रेत और मिट्टी की परतों का कोई भी स्टैक, प्रत्येक को अलग से दर्ज किया जाता है। प्रत्येक परत का शाफ्ट प्रतिरोध उसकी मृदा की विधि द्वारा और सिरा धारण (point bearing) उस मृदा की विधि द्वारा परिकलित किया जाता है जिसमें सिरा स्थित है।

आप दर्ज करते हैं

  • पाइल ज्यामिति
  • आठ परतों तक, रेत या मृत्तिका
  • जल स्तर
  • प्रत्येक मृदा प्रकार के लिए एक विधि

आपको मिलता है

  • Qp, Qs, Qu और Qall
  • प्रत्येक परत का हिस्सा
  • शाफ्ट और सिरा प्रतिरोध का आरेख
  • परतों और पाइल का 3D दृश्य
पाइल · परतदार मृदा पर पाइल
परतदार मृदा में पाइल क्षमता मॉड्यूल: हल किए गए उदाहरण, मॉडल, परिणाम, गणना और सिद्धांत की इसकी स्क्रीन

विश्लेषण के बाद आरेख और निर्णय।

आगे बढ़ें

पाइल में अधिक मॉड्यूल

यह उपयोग में आसान क्यों है

ऑनलाइन, आपके ब्राउज़र मेंआपके कंप्यूटर पर ब्राउज़र के अलावा कुछ नहीं चलता: पेज खोलें और काम करें।
कोई डोंगल नहीं, कुछ भी इंस्टॉल करने की आवश्यकता नहींकोई लाइसेंस कुंजी नहीं, कोई हार्डवेयर लॉक नहीं, अद्यतन रखने के लिए कोई इंस्टॉलेशन नहीं।
फ़ोन, टैबलेट या पीसी परकिसी भी वर्तमान ब्राउज़र में वही मॉड्यूल, डिवाइस के लिए व्यवस्थित स्क्रीन लेआउट के साथ।

Questions about the Pile on layered soil module

What does the GeoTerva Pile on layered soil module calculate?

Sand and clay layers along the shaft, each with its own method. Any stack of sand and clay layers, each typed on its own. The shaft resistance of each layer is computed by the method of its soil, and the point bearing by the method for the soil the tip stands in.

What do I enter in the Pile on layered soil module?

Pile geometry; up to eight layers, sand or clay; water table; and A method for each soil type.

What results does the Pile on layered soil module give?

Qp, Qs, Qu and Qall; the share of every layer; diagrams of the shaft and point resistance; and A 3D view of the layers and the pile. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile on layered soil module use?

K–δ; coyle & Castello; and α, λ, β.

How much does the Pile on layered soil module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile on layered soil module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.