GeoTerva 7 दिनों के लिए निःशुल्क

मृत्तिका में पाइल क्षमता मॉड्यूल

अनपवाहित मृत्तिका में एकल पाइल का सिरा और पार्श्व घर्षण प्रतिरोध।

प्रत्येक मॉड्यूल निःशुल्क खाते के साथ 7 दिनों के लिए खोलने हेतु निःशुल्क है। एक हल किए गए उदाहरण पर, बिना किसी खाते के भी ग्यारह मॉड्यूल खुलते हैं: उन्हें आज़माएं।

Meyerhof, Vesic या Reese & O’Neill द्वारा सिरा धारण और स्तारीकृत मृत्तिका में α, λ या β विधि द्वारा पार्श्व घर्षण। प्रत्येक परत अपना cu रखती है, और आसंजन गुणांक प्रत्येक परत के लिए दिखाया गया है।

आप दर्ज करते हैं

  • पाइल ज्यामिति
  • γ और cu के साथ मृत्तिका परतें
  • जल स्तर
  • सिरे और शाफ्ट के लिए विधियाँ, सुरक्षा गुणांक

आपको मिलता है

  • Qp, Qs, Qu और Qall
  • परत दर परत अपनी संख्याओं के साथ α, λ या β
  • पाइल के नीचे पार्श्व घर्षण
  • प्रतिरोध आरेख
पाइल · मृत्तिका में पाइल
मृत्तिका में पाइल क्षमता मॉड्यूल: हल किए गए उदाहरण, मॉडल, परिणाम, गणनाओं और सिद्धांत की इसकी स्क्रीनें

विश्लेषण के बाद आरेख और निर्णय।

आगे बढ़ें

पाइल में अधिक मॉड्यूल

यह उपयोग में आसान क्यों है

ऑनलाइन, आपके ब्राउज़र मेंआपके कंप्यूटर पर ब्राउज़र के अलावा कुछ नहीं चलता: पेज खोलें और काम करें।
कोई डोंगल नहीं, कुछ भी इंस्टॉल करने की आवश्यकता नहींकोई लाइसेंस कुंजी नहीं, कोई हार्डवेयर लॉक नहीं, अद्यतन रखने के लिए कोई इंस्टॉलेशन नहीं।
फ़ोन, टैबलेट या पीसी परकिसी भी वर्तमान ब्राउज़र में वही मॉड्यूल, डिवाइस के लिए व्यवस्थित स्क्रीन लेआउट के साथ।

Questions about the Pile in clay module

What does the GeoTerva Pile in clay module calculate?

Point and skin resistance of a single pile in undrained clay. The point bearing by Meyerhof, Vesic or Reese & O’Neill and the skin friction by the α, λ or β method in layered clay. Each layer carries its own cu, and the adhesion factor is shown for every layer.

What do I enter in the Pile in clay module?

Pile geometry; clay layers with γ and cu; water table; and methods for the point and the shaft, factor of safety.

What results does the Pile in clay module give?

Qp, Qs, Qu and Qall; α, λ or β with its numbers, layer by layer; skin friction down the pile; and the resistance diagrams. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile in clay module use?

α method; λ method; β method; and reese & O’Neill.

How much does the Pile in clay module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile in clay module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.