GeoTerva 7 दिनों के लिए निःशुल्क

पाइल समूह मॉड्यूल

प्रत्येक पाइल पर भार, समूह प्रभाव, सेटलमेंट और परतदार भूमि में एक समूह की पार्श्व प्रतिक्रिया।

प्रत्येक मॉड्यूल निःशुल्क खाते के साथ 7 दिनों के लिए खोलने हेतु निःशुल्क है। एक हल किए गए उदाहरण पर, बिना किसी खाते के भी ग्यारह मॉड्यूल खुलते हैं: उन्हें आज़माएं।

एक दृढ़ कैप (rigid cap) के नीचे ऊर्ध्वाधर पाइल का एक समूह, रेत और मृत्तिका की अधिकतम आठ परतों में। कैप भार को पाइलों के बीच साझा किया जाता है; क्षमता की गणना व्यक्तिगत पाइलों के रूप में की जाती है (प्रत्येक परत अपनी मृदा की दक्षता के साथ) और एक ब्लॉक के रूप में, तथा कम मान मान्य होता है; सेटलमेंट समूह का प्रत्यास्थ सेटलमेंट और 2L/3 के नीचे की मृत्तिका का समेकन सेटलमेंट है; और एक पार्श्व भार के तहत पंक्तियाँ इसे असमान रूप से साझा करती हैं, परतों के p–y वक्रों पर p-गुणकों द्वारा।

आप दर्ज करते हैं

  • पंक्तियाँ और पाइलें, अंतराल, काट और लंबाई
  • आठ परतों तक, रेत या मृत्तिका
  • जल स्तर
  • कैप पर ऊर्ध्वाधर भार, पार्श्व भार और आघूर्ण

आपको मिलता है

  • प्रत्येक पाइल पर संपीडन और तनन में भार
  • द दक्षता, ब्लॉक क्षमता और अनुमेय भार
  • प्रत्यास्थ और समेकन सेटलमेंट
  • कैप का विक्षेप और प्रत्येक पंक्ति का भार
पाइल · पाइल समूह
पाइल समूह मॉड्यूल: हल किए गए उदाहरण, मॉडल, परिणाम, गणनाओं और सिद्धांत की इसकी स्क्रीनें

विश्लेषण के बाद आरेख और निर्णय।

आगे बढ़ें

पाइल में अधिक मॉड्यूल

यह उपयोग में आसान क्यों है

ऑनलाइन, आपके ब्राउज़र मेंआपके कंप्यूटर पर ब्राउज़र के अलावा कुछ नहीं चलता: पेज खोलें और काम करें।
कोई डोंगल नहीं, कुछ भी इंस्टॉल करने की आवश्यकता नहींकोई लाइसेंस कुंजी नहीं, कोई हार्डवेयर लॉक नहीं, अद्यतन रखने के लिए कोई इंस्टॉलेशन नहीं।
फ़ोन, टैबलेट या पीसी परकिसी भी वर्तमान ब्राउज़र में वही मॉड्यूल, डिवाइस के लिए व्यवस्थित स्क्रीन लेआउट के साथ।

Questions about the Pile group module

What does the GeoTerva Pile group module calculate?

The load on every pile, the group effect, the settlement and the lateral response of a group in layered ground. A group of vertical piles under a rigid cap, in up to eight layers of sand and clay. The cap load is shared among the piles; the capacity is worked out as individual piles, each layer with the efficiency of its own soil, and as a block, and the lesser governs; the settlement is the elastic settlement of the group and the consolidation of the clay below 2L/3; and under a lateral load the rows share it unequally, by p-multipliers on the p–y curves of the layers.

What do I enter in the Pile group module?

Rows and piles, spacing, section and length; up to eight layers, sand or clay; water table; and vertical load, lateral load and moments on the cap.

What results does the Pile group module give?

The load on every pile, in compression and tension; efficiency, block capacity and the allowable load; elastic and consolidation settlement; and the deflection of the cap and the load of every row. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile group module use?

Converse–Labarre; kishida–Meyerhof, AASHTO; block failure; and p-multipliers.

How much does the Pile group module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile group module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.