GeoTerva مجاناً لمدة 7 أيام

وحدة قدرة تحمل الخازوق في التربة الرملية

مقاومة الارتكاز والمقاومة الجانبية لخازوق منفرد مدقوق في الرمل.

جميع الوحدات متاحة للاستخدام مجاناً لمدة 7 أيام عند إنشاء حساب مجاني. تتوفر 11 وحدة مفتوحة بالكامل دون الحاجة لتسجيل الدخول عبر مثال محلول: جربها الآن.

مقاومة الارتكاز بطريقة Meyerhof أو Vesic أو Coyle & Castello واحتكاك الجذع بطريقة K–δ أو Coyle & Castello، وتُختار كل منها على حدة. يتبع توزع الإجهاد الفعال على طول الجذع منسوب المياه الجوفية والعمق الحرِج.

تقوم بإدخال

  • طول الخازوق ومقطعه المربع أو الدائري
  • طبقات رملية محددة بـ γ و φ′
  • منسوب المياه الجوفية
  • طرق حساب الارتكاز والجذع، معامل الأمان

تحصل على

  • Qp, Qs, Qu و Qall
  • احتياطي احتكاك الجذع على طول الخازوق
  • مخطط الإجهاد الفعال
  • عرض ⁦3D⁩ للخازوق في التربة
الخوازيق · خازوق في تربة رملية
وحدة قدرة تحمل الخازوق في التربة الرملية: شاشاتها في المثال المحلول والنموذج والنتائج والحسابات والنظرية

الرسم وحكم الأمان بعد إجراء التحليل.

تعمّق أكثر

المزيد من الوحدات في الخوازيق

لماذا تمتاز بسهولة الاستخدام

عبر الإنترنت، في متصفحكلا يعمل أي شيء على جهازك سوى المتصفح: افتح الصفحة وابدأ العمل.
بدون مفتاح حماية (Dongle)، ولا يتطلب أي تثبيتلا مفتاح ترخيص، ولا قفل عتاد، ولا تثبيت يحتاج إلى تحديث.
على الهاتف أو اللوحي أو الحاسوب الشخصينفس الوحدة في أي متصفح حديث، مع تخطيط شاشة مخصص للجهاز.

Questions about the Pile in sand module

What does the GeoTerva Pile in sand module calculate?

Point and skin resistance of a single pile driven into sand. The point bearing by Meyerhof, Vesic or Coyle & Castello and the skin friction by the K–δ method or by Coyle & Castello, each chosen on its own. The effective stress along the shaft follows the water table and the critical depth.

What do I enter in the Pile in sand module?

Pile length, square or circular section; sand layers with γ and φ′; water table; and methods for the point and the shaft, factor of safety.

What results does the Pile in sand module give?

Qp, Qs, Qu and Qall; unit skin friction down the pile; the effective stress profile; and A 3D view of the pile in the ground. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile in sand module use?

Meyerhof; vesic; and coyle & Castello.

How much does the Pile in sand module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile in sand module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.