GeoTerva مجاناً لمدة 7 أيام

وحدة مجموعة الخوازيق

الحمل على كل خازوق، كفاءة المجموعة، الهبوط والاستجابة الجانبية للمجموعة في تربة طبقية.

جميع الوحدات متاحة للاستخدام مجاناً لمدة 7 أيام عند إنشاء حساب مجاني. تتوفر 11 وحدة مفتوحة بالكامل دون الحاجة لتسجيل الدخول عبر مثال محلول: جربها الآن.

مجموعة خوازيق رأسية تحت هامة صلبة (Pile Cap)، في تربة تتكون من حتى ثماني طبقات من الرمل والطين. يتم توزيع حمل الهامة على الخوازيق؛ وتُحسب قدرة التحمل كخوازيق منفردة مع تطبيق كفاءة التربة الخاصة بكل طبقة، وككتلة واحدة، وتكون القيمة الأصغر هي الحاكمة؛ ويُحسب الهبوط كمرن لمجموعة الخوازيق وانضمام للطين أسفل ⁦2L/3⁩؛ وتحت تأثير الحمل الجانبي تتشارك الصفوف الحمل بشكل غير متساوٍ باستخدام معاملات التخفيض p-multipliers على منحنيات p–y للطبقات.

تقوم بإدخال

  • الصفوف والخوازيق، وتباعد الخوازيق، والمقطع والطول
  • حتى ثماني طبقات، رملية أو طينية
  • منسوب المياه الجوفية
  • الحمل الرأسي والحمل الجانبي والعزوم على الهامة

تحصل على

  • الحمل الواقع على كل خازوق، في الضغط والشد
  • الكفاءة وقدرة تحمل الكتلة والحمل المسموح به
  • الهبوط المرن وهبوط الانضمام
  • انحراف الهامة وحمل كل صف
الخوازيق · مجموعة خوازيق
وحدة مجموعة الخوازيق: شاشاتها في المثال المحلول والنموذج والنتائج والحسابات والنظرية

الرسم وحكم الأمان بعد إجراء التحليل.

تعمّق أكثر

المزيد من الوحدات في الخوازيق

لماذا تمتاز بسهولة الاستخدام

عبر الإنترنت، في متصفحكلا يعمل أي شيء على جهازك سوى المتصفح: افتح الصفحة وابدأ العمل.
بدون مفتاح حماية (Dongle)، ولا يتطلب أي تثبيتلا مفتاح ترخيص، ولا قفل عتاد، ولا تثبيت يحتاج إلى تحديث.
على الهاتف أو اللوحي أو الحاسوب الشخصينفس الوحدة في أي متصفح حديث، مع تخطيط شاشة مخصص للجهاز.

Questions about the Pile group module

What does the GeoTerva Pile group module calculate?

The load on every pile, the group effect, the settlement and the lateral response of a group in layered ground. A group of vertical piles under a rigid cap, in up to eight layers of sand and clay. The cap load is shared among the piles; the capacity is worked out as individual piles, each layer with the efficiency of its own soil, and as a block, and the lesser governs; the settlement is the elastic settlement of the group and the consolidation of the clay below 2L/3; and under a lateral load the rows share it unequally, by p-multipliers on the p–y curves of the layers.

What do I enter in the Pile group module?

Rows and piles, spacing, section and length; up to eight layers, sand or clay; water table; and vertical load, lateral load and moments on the cap.

What results does the Pile group module give?

The load on every pile, in compression and tension; efficiency, block capacity and the allowable load; elastic and consolidation settlement; and the deflection of the cap and the load of every row. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile group module use?

Converse–Labarre; kishida–Meyerhof, AASHTO; block failure; and p-multipliers.

How much does the Pile group module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile group module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.