GeoTerva مجاناً لمدة 7 أيام

وحدة قدرة تحمل الخازوق في تربة متعددة الطبقات

طبقات رملية وطينية على طول الجذع، لكل منها طريقة الحساب الخاصة بها.

جميع الوحدات متاحة للاستخدام مجاناً لمدة 7 أيام عند إنشاء حساب مجاني. تتوفر هذه الوحدة أيضاً دون الحاجة لتسجيل الدخول عبر مثال محلول: جرب العرض التوضيحي المجاني.

أي تتابع لطبقات الرمل والطين، يُدخل كل منها بشكل منفصل. تُحسب مقاومة الاحتكاك الجانبي لكل طبقة بطريقة التربة الخاصة بها، ومقاومة الارتكاز عند السن بالطريقة المخصصة للتربة التي يستند إليها السن.

تقوم بإدخال

  • أبعاد الخازوق
  • حتى ثماني طبقات، رملية أو طينية
  • منسوب المياه الجوفية
  • طريقة لكل نوع تربة

تحصل على

  • Qp, Qs, Qu و Qall
  • مساهمة كل طبقة
  • مخططات مقاومة الجذع والارتكاز
  • عرض ⁦3D⁩ للطبقات والخازوق
الخوازيق · خازوق في تربة متعددة الطبقات
وحدة قدرة تحمل الخازوق في تربة متعددة الطبقات: شاشاتها في المثال المحلول والنموذج والنتائج والحسابات والنظرية

الرسم وحكم الأمان بعد إجراء التحليل.

تعمّق أكثر

المزيد من الوحدات في الخوازيق

لماذا تمتاز بسهولة الاستخدام

عبر الإنترنت، في متصفحكلا يعمل أي شيء على جهازك سوى المتصفح: افتح الصفحة وابدأ العمل.
بدون مفتاح حماية (Dongle)، ولا يتطلب أي تثبيتلا مفتاح ترخيص، ولا قفل عتاد، ولا تثبيت يحتاج إلى تحديث.
على الهاتف أو اللوحي أو الحاسوب الشخصينفس الوحدة في أي متصفح حديث، مع تخطيط شاشة مخصص للجهاز.

Questions about the Pile on layered soil module

What does the GeoTerva Pile on layered soil module calculate?

Sand and clay layers along the shaft, each with its own method. Any stack of sand and clay layers, each typed on its own. The shaft resistance of each layer is computed by the method of its soil, and the point bearing by the method for the soil the tip stands in.

What do I enter in the Pile on layered soil module?

Pile geometry; up to eight layers, sand or clay; water table; and A method for each soil type.

What results does the Pile on layered soil module give?

Qp, Qs, Qu and Qall; the share of every layer; diagrams of the shaft and point resistance; and A 3D view of the layers and the pile. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile on layered soil module use?

K–δ; coyle & Castello; and α, λ, β.

How much does the Pile on layered soil module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile on layered soil module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.