GeoTerva مجاناً لمدة 7 أيام

وحدة قدرة تحمل الخازوق في الطين

مقاومة الارتكاز والمقاومة الجانبية لخازوق منفرد في طين غير مصّرف.

جميع الوحدات متاحة للاستخدام مجاناً لمدة 7 أيام عند إنشاء حساب مجاني. تتوفر 11 وحدة مفتوحة بالكامل دون الحاجة لتسجيل الدخول عبر مثال محلول: جربها الآن.

مقاومة الارتكاز بطريقة مايرشوف، فيسيك، أو ريس وأونيل، واحتكاك الجذع بطريقة α أو λ أو β في الطين الطبقي. تحمل كل طبقة قيمة cu الخاصة بها، ويُعرض معامل الالتصاق لكل طبقة.

تقوم بإدخال

  • أبعاد الخازوق
  • طبقات الطين مع γ و cu
  • منسوب المياه الجوفية
  • طرق حساب الارتكاز والجذع، معامل الأمان

تحصل على

  • Qp, Qs, Qu و Qall
  • طريقة α أو λ أو β بأرقامها، طبقة تلو الأخرى
  • احتكاك الجذع على طول الخازوق
  • مخططات المقاومة
الخوازيق · خازوق في تربة طينية
وحدة قدرة تحمل الخازوق في التربة الطينية: شاشاتها في المثال المحلول والنموذج والنتائج والحسابات والنظرية

الرسم وحكم الأمان بعد إجراء التحليل.

تعمّق أكثر

المزيد من الوحدات في الخوازيق

لماذا تمتاز بسهولة الاستخدام

عبر الإنترنت، في متصفحكلا يعمل أي شيء على جهازك سوى المتصفح: افتح الصفحة وابدأ العمل.
بدون مفتاح حماية (Dongle)، ولا يتطلب أي تثبيتلا مفتاح ترخيص، ولا قفل عتاد، ولا تثبيت يحتاج إلى تحديث.
على الهاتف أو اللوحي أو الحاسوب الشخصينفس الوحدة في أي متصفح حديث، مع تخطيط شاشة مخصص للجهاز.

Questions about the Pile in clay module

What does the GeoTerva Pile in clay module calculate?

Point and skin resistance of a single pile in undrained clay. The point bearing by Meyerhof, Vesic or Reese & O’Neill and the skin friction by the α, λ or β method in layered clay. Each layer carries its own cu, and the adhesion factor is shown for every layer.

What do I enter in the Pile in clay module?

Pile geometry; clay layers with γ and cu; water table; and methods for the point and the shaft, factor of safety.

What results does the Pile in clay module give?

Qp, Qs, Qu and Qall; α, λ or β with its numbers, layer by layer; skin friction down the pile; and the resistance diagrams. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile in clay module use?

α method; λ method; β method; and reese & O’Neill.

How much does the Pile in clay module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile in clay module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.