GeoTerva 7 gün ücretsiz dene

Kil ve kum tabakaları için toplam oturma modülü

Kil ve kum tabakalarından oluşan bir profilin toplam oturması.

Ücretsiz bir hesapla her modül 7 gün boyunca ücretsiz açılır.On bir modül ise hiç hesap gerekmeden çözümlü bir örnekle açılır: deneyin.

Her iki türden tabakalar üzerindeki dikdörtgen ya da şerit temelin toplam oturması: her tabakanın elastisite kuramıyla hesaplanan ani oturması (kil drenajsız, kum drenajlı) ile kil tabakalarının tüm gerilme izi boyunca konsolidasyon oturmasının toplamı. Gerilmeler, birim şekil değiştirme ve oturma kesit üzerinde renk bantları olarak çizilir; oturma–zaman eğrisi konsolidasyondan elde edilir.

Girdiler

  • Temel boyutları, derinlik ve taban basıncı
  • E ve ν ile kohezyonlu ya da granüler tabakalar
  • Kil tabakaları: e₀, Cc, Cr, Cs ya da mv, σ′p, cv
  • Yeraltı su seviyesi ve kazı

Çıktılar

  • Ani, konsolidasyon ve toplam oturma
  • Merkez, köşe ve rijit temel
  • Her tabakanın oturması
  • Oturma–zaman eğrisi
  • Gerilme, birim şekil değiştirme ve oturma renk bantları
Oturma · 2B oturma
Kil ve kum tabakaları için toplam oturma modülü: çözümlü örnek üzerindeki ekranları — model, sonuçlar, hesaplar ve teori

Analizden sonra çizim ve karar.

Daha fazlası

Oturma paketindeki diğer modüller

Kullanımı neden kolay

Çevrim içi, tarayıcınızdaBilgisayarınızda tarayıcı dışında hiçbir şey çalışmaz: sayfayı açın ve çalışmaya başlayın.
Donanım kilidi yok, kurulum yokLisans anahtarı, donanım kilidi ya da güncel tutulması gereken bir kurulum yoktur.
Telefonda, tablette ya da bilgisayardaGüncel her tarayıcıda aynı modül; ekran düzeni cihaza göre uyarlanır.

Questions about the Settlement 2D module

What does the GeoTerva Settlement 2D module calculate?

Total settlement of a profile of clay and sand layers. The total settlement of a rectangular or strip foundation on layers of both kinds: the immediate settlement of every layer by the theory of elasticity (clay undrained, sand drained) plus the consolidation of the clay layers along their full stress path. The stresses, the strain and the settlement are drawn as colour bands over the section, and the settlement–time curve follows from the consolidation.

What do I enter in the Settlement 2D module?

Foundation size, depth and pressure; layers, cohesive or granular, with E and ν; clay layers: e₀, Cc, Cr, Cs or mv, σ′_p, cv; and water table and the excavation.

What results does the Settlement 2D module give?

Immediate, consolidation and total settlement; centre, corner and rigid foundation; the settlement of every layer; the settlement–time curve; and colour bands of stress, strain and settlement. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Settlement 2D module use?

Steinbrenner; boussinesq; and terzaghi consolidation.

How much does the Settlement 2D module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Settlement pack (4 modules): $299 a year or $30 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Settlement 2D module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.