GeoTerva 7 gün ücretsiz dene

Mononobe–Okabe toprak basıncı modülü

Deprem sırasında duvara etkiyen aktif kuvvet.

Ücretsiz bir hesapla her modül 7 gün boyunca ücretsiz açılır.On bir modül ise hiç hesap gerekmeden çözümlü bir örnekle açılır: deneyin.

kh ve kv ile psödo-statik aktif kuvvet; duvar sürtünmesi, eğik duvar sırtı, tabakalı ve eğimli granüler dolgu, boşluk suyu zeminle birlikte hareket eden ya da serbest olan yeraltı suyu ve sürşarj dikkate alınır. Kuvvet, statik ve deprem bileşenlerine ayrılır.

Girdiler

  • kh ve kv
  • Duvar ve dolgu geometrisi
  • Tabakalar, su, sürşarj

Çıktılar

  • Her tabakanın KAE değeri
  • Kuvvetin statik ve deprem bileşenleri
  • Etki çizgisi
  • Kritik düzlem
Yanal toprak basıncı · Mononobe–Okabe
Mononobe–Okabe toprak basıncı modülü: çözümlü örnek üzerindeki ekranları — model, sonuçlar, hesaplar ve teori

Analizden sonra çizim ve karar.

Daha fazlası

Yanal toprak basıncı paketindeki diğer modüller

Kullanımı neden kolay

Çevrim içi, tarayıcınızdaBilgisayarınızda tarayıcı dışında hiçbir şey çalışmaz: sayfayı açın ve çalışmaya başlayın.
Donanım kilidi yok, kurulum yokLisans anahtarı, donanım kilidi ya da güncel tutulması gereken bir kurulum yoktur.
Telefonda, tablette ya da bilgisayardaGüncel her tarayıcıda aynı modül; ekran düzeni cihaza göre uyarlanır.

Questions about the Mononobe–Okabe module

What does the GeoTerva Mononobe–Okabe module calculate?

The active force on a wall during an earthquake. The pseudo-static active force from kh and kv, with wall friction, an inclined back and a sloping granular backfill in layers, a water table with restrained or free pore water, and a surcharge. The force is split into its static and seismic parts.

What do I enter in the Mononobe–Okabe module?

kh and kv; wall and backfill geometry; and layers, water, surcharge.

What results does the Mononobe–Okabe module give?

KAE of each layer; static and seismic parts of the force; line of action; and critical plane. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Mononobe–Okabe module use?

Mononobe–Okabe; and seed & Whitman.

How much does the Mononobe–Okabe module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Lateral Earth Pressure pack (7 modules): $149 a year or $15 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Mononobe–Okabe module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.