GeoTerva Бесплатно на 7 дней

Модуль котлована с креплением в песках

Кажущееся давление, распорки, распределительные пояса и забирка в песке.

Каждый модуль доступен бесплатно на 7 дней при создании аккаунта. Этот модуль можно открыть и без регистрации на готовом примере: запустить бесплатное демо.

Эпюра Пека для песчаных грунтов при расположении УВВ ниже или выше дна, усилия в распорках по шарнирной схеме, а также моменты сопротивления ограждения и поясов. При водопонижении проверяется коэффициент запаса против гидравлического выпора (суффозии).

Вы вводите

  • Глубина и ширина котлована
  • γ и φ′ песка, уровень грунтовых вод (УГВ)
  • Отметки и шаг распорок
  • Марки стали и нормативный документ

Вы получаете

  • Эпюра давления
  • Усилие в каждой распорке
  • Сечения ограждения и распределительных поясов
  • Коэффициент запаса против гидравлического выпора (суффозии)
Котлованы с креплением · Котлован в песчаном грунте
Модуль котлована с креплением в песках: экраны примера расчёта, модели, результатов, вычислений и теории

Чертеж и результат проверки после выполнения расчета.

Узнать больше

Другие модули раздела «Котлованы с креплением»

Почему это удобно

Онлайн, в вашем браузереНа вашем устройстве запускается только браузер: откройте страницу и работайте.
Без аппаратных ключей и установкиНикаких лицензионных ключей, защитных USB-ключей и обновлений дистрибутива.
На смартфоне, планшете или ПКОдин и тот же модуль в любом современном браузере с адаптивным интерфейсом.

Questions about the Braced cut in sand module

What does the GeoTerva Braced cut in sand module calculate?

Apparent pressure, struts, wales and sheeting in sand. Peck’s envelope for sand with the water table below or above the base, the strut loads from the hinged spans, and the section moduli of the sheeting and the wales. When the cut is dewatered the factor of safety against piping is checked.

What do I enter in the Braced cut in sand module?

Cut depth and width; sand γ and φ′, water table; strut levels and spacing; and steel grades and code.

What results does the Braced cut in sand module give?

The pressure envelope; the load of every strut; sheeting and wale sections; and factor of safety against piping. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Braced cut in sand module use?

Peck (1969); EN 1993-1-1; and AISC 360-22.

How much does the Braced cut in sand module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Braced cut in sand module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.