GeoTerva Бесплатно на 7 дней

Модуль котлована с креплением в глинах

От мягкой до твердой глины с учетом выпора дна котлована.

Каждый модуль доступен бесплатно на 7 дней при создании аккаунта. Одиннадцать модулей можно открыть без регистрации на готовом примере: попробовать.

Эпюра давлений для мягких, средних или твёрдых глин на основе числа устойчивости, усилия в распорках, подбор ограждения и распределительных поясов, проверка трещины растяжения у верхней распорки и коэффициент запаса против выпора грунта дна котлована.

Вы вводите

  • Геометрия котлована
  • γ и cu глинистого грунта
  • Распорки
  • Марки стали и нормативный документ

Вы получаете

  • Эпюра давления
  • Усилия в распорках
  • Сечения
  • Коэффициент запаса устойчивости против выпора дна
Котлованы с креплением · Котлован в глинистом грунте
Модуль котлована с креплением в глинах: экраны примера расчёта, модели, результатов, вычислений и теории

Чертеж и результат проверки после выполнения расчета.

Узнать больше

Другие модули раздела «Котлованы с креплением»

Почему это удобно

Онлайн, в вашем браузереНа вашем устройстве запускается только браузер: откройте страницу и работайте.
Без аппаратных ключей и установкиНикаких лицензионных ключей, защитных USB-ключей и обновлений дистрибутива.
На смартфоне, планшете или ПКОдин и тот же модуль в любом современном браузере с адаптивным интерфейсом.

Questions about the Braced cut in clay module

What does the GeoTerva Braced cut in clay module calculate?

Soft to stiff clay, with the bottom heave of the cut. The envelope for soft to medium or stiff clay chosen from the stability number, the strut loads, the sheeting and the wales, a check of the tension crack at the first strut and the factor of safety against bottom heave.

What do I enter in the Braced cut in clay module?

Cut geometry; clay γ and cu; struts; and steel grades and code.

What results does the Braced cut in clay module give?

The pressure envelope; strut loads; sections; and bottom heave factor of safety. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Braced cut in clay module use?

Peck (1969).

How much does the Braced cut in clay module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Braced cut in clay module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.