砂層と粘土層の任意の積層を扱い、各層の土質を個別に指定します。各層の周面摩擦抵抗はその層の土質に応じた方法で、先端支持力は杭先端が位置する土質に応じた方法で計算します。
入力するもの
- 杭の形状寸法
- 最大8層、砂または粘土
- 地下水位
- 土質ごとの計算方法
得られるもの
- Qp、Qs、Qu、Qall
- 各層の分担
- 周面摩擦抵抗と先端抵抗の分布図
- 土層と杭の3D表示

計算実行後の図と判定。
砂層と粘土層の任意の積層を扱い、各層の土質を個別に指定します。各層の周面摩擦抵抗はその層の土質に応じた方法で、先端支持力は杭先端が位置する土質に応じた方法で計算します。
入力するもの
得られるもの

計算実行後の図と判定。
Sand and clay layers along the shaft, each with its own method. Any stack of sand and clay layers, each typed on its own. The shaft resistance of each layer is computed by the method of its soil, and the point bearing by the method for the soil the tip stands in.
Pile geometry; up to eight layers, sand or clay; water table; and A method for each soil type.
Qp, Qs, Qu and Qall; the share of every layer; diagrams of the shaft and point resistance; and A 3D view of the layers and the pile. Every step of the working is written out, and the results go into a Word or PDF report.
K–δ; coyle & Castello; and α, λ, β.
Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.
Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.