成層した粘土地盤について、Meyerhof、VesicまたはReese & O’Neillによる先端支持力と、α法、λ法またはβ法による周面摩擦抵抗を求めます。各層はそれぞれ固有のcuを持ち、付着係数は層ごとに表示します。
入力するもの
- 杭の形状寸法
- γとcuを持つ粘土層
- 地下水位
- 先端と杭軸の算定方法、安全率
得られるもの
- Qp、Qs、Qu、Qall
- α法・λ法・β法の数値を層ごとに表示
- 杭に沿った周面摩擦
- 抵抗力の分布図

計算実行後の図と判定。
成層した粘土地盤について、Meyerhof、VesicまたはReese & O’Neillによる先端支持力と、α法、λ法またはβ法による周面摩擦抵抗を求めます。各層はそれぞれ固有のcuを持ち、付着係数は層ごとに表示します。
入力するもの
得られるもの

計算実行後の図と判定。
Point and skin resistance of a single pile in undrained clay. The point bearing by Meyerhof, Vesic or Reese & O’Neill and the skin friction by the α, λ or β method in layered clay. Each layer carries its own cu, and the adhesion factor is shown for every layer.
Pile geometry; clay layers with γ and cu; water table; and methods for the point and the shaft, factor of safety.
Qp, Qs, Qu and Qall; α, λ or β with its numbers, layer by layer; skin friction down the pile; and the resistance diagrams. Every step of the working is written out, and the results go into a Word or PDF report.
α method; λ method; β method; and reese & O’Neill.
Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.
Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.