GeoTerva 7日間無料

群杭モジュール

成層地盤中の群杭について、各杭の荷重、群杭効果、沈下および水平挙動を求めます。

無料アカウントがあれば、すべてのモジュールを7日間無料でご利用いただけます。11個のモジュールは、アカウントがなくても計算例で開けます。お試しください。

剛なフーチングの下に並ぶ鉛直杭の群を、砂層と粘土層からなる最大8層の地盤について扱います。フーチング荷重は各杭に配分されます。支持力は、各層を自層の土質に応じた効率で評価した単杭の支持力の合計と、群杭をブロックとみなした支持力の双方から求め、小さい方を採用します。沈下は、群杭の弾性沈下と、2L/3より下の粘土の圧密沈下から求めます。水平荷重を受ける場合は、各層のp–y曲線にp低減係数を乗じて、各列の分担が不均等になることを考慮します。

入力するもの

  • 列数と杭本数、間隔、断面、長さ
  • 最大8層、砂または粘土
  • 地下水位
  • フーチングに作用する鉛直荷重・水平荷重・モーメント

得られるもの

  • 各杭の荷重(圧縮・引張)
  • 群杭効率、ブロック支持力、許容荷重
  • 弾性沈下と圧密沈下
  • フーチングのたわみと各列の荷重
杭基礎 · 群杭
群杭モジュール:計算例に基づく画面(モデル、結果、計算過程、理論)

計算実行後の図と判定。

さらに詳しく

杭基礎のほかのモジュール

使いやすい理由

オンライン、ブラウザーでお使いのコンピューターで動くのはブラウザーだけです。ページを開けば、すぐに作業できます。
ドングル不要、インストール不要ライセンスキーもハードウェアロックも不要で、更新を管理すべきインストールもありません。
スマートフォン、タブレット、PCで最新のブラウザーであれば同じモジュールを利用でき、画面はデバイスに合わせて最適に配置されます。

Questions about the Pile group module

What does the GeoTerva Pile group module calculate?

The load on every pile, the group effect, the settlement and the lateral response of a group in layered ground. A group of vertical piles under a rigid cap, in up to eight layers of sand and clay. The cap load is shared among the piles; the capacity is worked out as individual piles, each layer with the efficiency of its own soil, and as a block, and the lesser governs; the settlement is the elastic settlement of the group and the consolidation of the clay below 2L/3; and under a lateral load the rows share it unequally, by p-multipliers on the p–y curves of the layers.

What do I enter in the Pile group module?

Rows and piles, spacing, section and length; up to eight layers, sand or clay; water table; and vertical load, lateral load and moments on the cap.

What results does the Pile group module give?

The load on every pile, in compression and tension; efficiency, block capacity and the allowable load; elastic and consolidation settlement; and the deflection of the cap and the load of every row. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile group module use?

Converse–Labarre; kishida–Meyerhof, AASHTO; block failure; and p-multipliers.

How much does the Pile group module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile group module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.