GeoTerva Open the module

Formulas and tables · Lateral earth pressure

Earth pressure coefficients Ka, Kp, K0: formulas and table

The active, passive and at-rest coefficients for every friction angle from 20° to 45°: Rankine’s, Coulomb’s with wall friction, and Jaky’s K0.

  • Free to read
  • φ = 20–45°
  • Rankine · Coulomb · Jaky
  • Worked example

1What the coefficients areThe ratio of horizontal to vertical effective stress.

An earth pressure coefficient K is the ratio of the horizontal to the vertical effective stress in the soil behind a wall. It takes three values: at rest (K0, the wall does not move), active (Ka, the wall moves away from the soil until the soil fails) and passive (Kp, the wall is pushed into the soil until it fails). In a cohesionless soil the lateral pressure at depth z is

σh=Kγz,Pa=12KaγH2

2Rankine and JakyA smooth vertical wall and level backfill.

Ka=tan2(45°−φ/2)=1−sin⁡φ1+sin⁡φ
Kp=tan2(45°+φ/2)=1Ka
K0=1−sin⁡φ(Jaky, normally consolidated soil)

With cohesion c, the Rankine pressures become σa = Kaγz − 2c√Ka and σp = Kpγz + 2c√Kp.

3Coulomb, with wall frictionA rough wall: the wedge theory.

Coulomb’s wedge theory allows friction δ between wall and soil. For a vertical wall and level backfill:

Ka=cos2φcos⁡δ[1+sin(φ+δ)sin⁡φcos⁡δ]2

Wall friction lowers Ka a little and raises the passive Coulomb coefficient a great deal; for δ larger than about φ/3 Coulomb’s plane surface overestimates Kp, and a curved (log-spiral) surface should be used.

4Table of the coefficients, φ = 20–45°Every degree.

Table 1. Earth pressure coefficients by friction angle (vertical wall, level backfill)
φ (°)K0 JakyKa RankineKp RankineKa Coulomb δ = φ/2Ka Coulomb δ = 2φ/3Kp Coulomb δ = φ/3
200.6580.4902.0400.4470.4382.414
210.6420.4722.1170.4300.4212.537
220.6250.4552.1980.4130.4052.669
230.6090.4382.2830.3970.3902.810
240.5930.4222.3710.3820.3752.961
250.5770.4062.4640.3670.3613.124
260.5620.3902.5610.3530.3473.298
270.5460.3762.6630.3400.3343.486
280.5310.3612.7700.3260.3213.688
290.5150.3472.8820.3140.3093.907
300.5000.3333.0000.3010.2974.143
310.4850.3203.1240.2900.2864.400
320.4700.3073.2550.2780.2754.679
330.4550.2953.3920.2670.2644.984
340.4410.2833.5370.2560.2545.316
350.4260.2713.6900.2460.2445.680
360.4120.2603.8520.2360.2356.080
370.3980.2494.0230.2270.2266.521
380.3840.2384.2040.2170.2177.007
390.3710.2284.3950.2080.2087.547
400.3570.2174.5990.1990.2008.147
410.3440.2084.8150.1910.1928.818
420.3310.1985.0450.1830.1849.569
430.3180.1895.2890.1750.17610.416
440.3050.1805.5500.1670.16911.375
450.2930.1725.8280.1600.16212.466

Coulomb coefficients for a vertical back and a horizontal backfill; δ is the angle of wall friction. Values computed by GeoTerva.

5Worked exampleA 5 m wall retaining sand, φ = 30°.

A smooth vertical wall H = 5 m high retains dry sand with φ = 30° and γ = 18 kN/m³. From the table, Ka = 0.333 and Kp = 3.000.

The active thrust is Pa = ½ Ka γ H² = ½ × 0.333 × 18 × 5² = 75.0 kN/m, acting at H/3 = 1.67 m above the base. At rest, with K0 = 0.500, the thrust would be 112.5 kN/m: the wall must move for the active state to develop.

6QuestionsShort answers.

What is the difference between Ka, Kp and K0?

K0 holds when the wall does not move, Ka when it moves away from the soil enough for the soil to fail in the active state, and Kp when it is pushed into the soil until the passive state is reached. Ka < K0 < Kp.

When is Rankine’s Ka conservative?

Rankine assumes a smooth wall; real walls have friction, which lowers the active pressure (Coulomb). Rankine’s Ka is therefore slightly conservative for a rough vertical wall with level backfill.

Why should Coulomb’s Kp be used with care?

With large wall friction (δ > φ/3) the plane failure surface of Coulomb overestimates the passive resistance; a log-spiral surface gives safer values.

The theory behind it