GeoTerva Gratis durante 7 días

Módulo de capacidad de pilotes en arena

Resistencia por punta y por fuste de un pilote aislado hincado en arena.

Todos los módulos se pueden abrir gratis durante 7 días con una cuenta gratuita.Once módulos se abren sin ninguna cuenta, sobre un ejemplo resuelto: pruébelos.

La resistencia por punta según Meyerhof, Vesic o Coyle & Castello y la resistencia por fuste según el método K–δ o el de Coyle & Castello, cada una elegida por separado. La tensión efectiva a lo largo del fuste tiene en cuenta el nivel freático y la profundidad crítica.

Qué introduce

  • Longitud del pilote, sección cuadrada o circular
  • Estratos de arena con γ y φ′
  • Nivel freático
  • Métodos para la punta y el fuste, factor de seguridad

Qué obtiene

  • Qp, Qs, Qu y Qall
  • Resistencia unitaria por fuste a lo largo del pilote
  • El perfil de tensiones efectivas
  • Una vista 3D del pilote en el terreno
Pilotes · Pilote en arena
Módulo de capacidad de pilotes en arena: sus pantallas en el ejemplo resuelto, el modelo, los resultados, los cálculos y la teoría

El dibujo y el veredicto tras Calcular.

Ir más lejos

Más módulos de Pilotes

Por qué es fácil de usar

En línea, en su navegadorLo único que se ejecuta en su equipo es el navegador: abra la página y trabaje.
Sin llave de hardware, nada que instalarSin clave de licencia, sin bloqueo por hardware, sin instalación que mantener actualizada.
En el móvil, la tableta o el PCEl mismo módulo en cualquier navegador actual, con la pantalla adaptada al dispositivo.

Questions about the Pile in sand module

What does the GeoTerva Pile in sand module calculate?

Point and skin resistance of a single pile driven into sand. The point bearing by Meyerhof, Vesic or Coyle & Castello and the skin friction by the K–δ method or by Coyle & Castello, each chosen on its own. The effective stress along the shaft follows the water table and the critical depth.

What do I enter in the Pile in sand module?

Pile length, square or circular section; sand layers with γ and φ′; water table; and methods for the point and the shaft, factor of safety.

What results does the Pile in sand module give?

Qp, Qs, Qu and Qall; unit skin friction down the pile; the effective stress profile; and A 3D view of the pile in the ground. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile in sand module use?

Meyerhof; vesic; and coyle & Castello.

How much does the Pile in sand module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile in sand module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.