GeoTerva Gratis durante 7 días

Módulo de grupo de pilotes

La carga en cada pilote, el efecto de grupo, el asentamiento y la respuesta lateral de un grupo de pilotes en terreno estratificado.

Todos los módulos se pueden abrir gratis durante 7 días con una cuenta gratuita.Once módulos se abren sin ninguna cuenta, sobre un ejemplo resuelto: pruébelos.

Un grupo de pilotes verticales bajo un cabezal rígido, en hasta ocho estratos de arena y arcilla. La carga del cabezal se reparte entre los pilotes; la capacidad se determina como pilotes individuales, cada estrato con la eficiencia de su propio suelo, y como bloque, y rige la menor; el asentamiento es el asentamiento elástico del grupo más la consolidación de la arcilla situada por debajo de 2L/3; y bajo una carga lateral las filas la reparten de forma desigual, mediante multiplicadores p aplicados a las curvas p–y de los estratos.

Qué introduce

  • Filas y pilotes, separación, sección y longitud
  • Hasta ocho estratos, de arena o de arcilla
  • Nivel freático
  • Carga vertical, carga lateral y momentos en el cabezal

Qué obtiene

  • La carga de cada pilote, a compresión y a tracción
  • Eficiencia, capacidad del bloque y carga admisible
  • Asentamiento elástico y por consolidación
  • El desplazamiento del cabezal y la carga de cada fila
Pilotes · Grupo de pilotes
Módulo de grupo de pilotes: sus pantallas en el ejemplo resuelto, el modelo, los resultados, los cálculos y la teoría

El dibujo y el veredicto tras Calcular.

Ir más lejos

Más módulos de Pilotes

Por qué es fácil de usar

En línea, en su navegadorLo único que se ejecuta en su equipo es el navegador: abra la página y trabaje.
Sin llave de hardware, nada que instalarSin clave de licencia, sin bloqueo por hardware, sin instalación que mantener actualizada.
En el móvil, la tableta o el PCEl mismo módulo en cualquier navegador actual, con la pantalla adaptada al dispositivo.

Questions about the Pile group module

What does the GeoTerva Pile group module calculate?

The load on every pile, the group effect, the settlement and the lateral response of a group in layered ground. A group of vertical piles under a rigid cap, in up to eight layers of sand and clay. The cap load is shared among the piles; the capacity is worked out as individual piles, each layer with the efficiency of its own soil, and as a block, and the lesser governs; the settlement is the elastic settlement of the group and the consolidation of the clay below 2L/3; and under a lateral load the rows share it unequally, by p-multipliers on the p–y curves of the layers.

What do I enter in the Pile group module?

Rows and piles, spacing, section and length; up to eight layers, sand or clay; water table; and vertical load, lateral load and moments on the cap.

What results does the Pile group module give?

The load on every pile, in compression and tension; efficiency, block capacity and the allowable load; elastic and consolidation settlement; and the deflection of the cap and the load of every row. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile group module use?

Converse–Labarre; kishida–Meyerhof, AASHTO; block failure; and p-multipliers.

How much does the Pile group module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile group module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.