GeoTerva Gratis durante 7 días

Módulo de capacidad de pilotes en arcilla

Resistencia por punta y por fuste de un pilote aislado en arcilla sin drenaje.

Todos los módulos se pueden abrir gratis durante 7 días con una cuenta gratuita.Once módulos se abren sin ninguna cuenta, sobre un ejemplo resuelto: pruébelos.

La resistencia por punta según Meyerhof, Vesic o Reese & O’Neill y la resistencia por fuste según el método α, λ o β en arcilla estratificada. Cada estrato lleva su propia cu y el factor de adhesión se muestra para cada estrato.

Qué introduce

  • Geometría del pilote
  • Estratos de arcilla con γ y cu
  • Nivel freático
  • Métodos para la punta y el fuste, factor de seguridad

Qué obtiene

  • Qp, Qs, Qu y Qall
  • α, λ o β con sus valores, estrato por estrato
  • Resistencia por fuste a lo largo del pilote
  • Los diagramas de resistencia
Pilotes · Pilote en arcilla
Módulo de capacidad de pilotes en arcilla: sus pantallas en el ejemplo resuelto, el modelo, los resultados, los cálculos y la teoría

El dibujo y el veredicto tras Calcular.

Ir más lejos

Más módulos de Pilotes

Por qué es fácil de usar

En línea, en su navegadorLo único que se ejecuta en su equipo es el navegador: abra la página y trabaje.
Sin llave de hardware, nada que instalarSin clave de licencia, sin bloqueo por hardware, sin instalación que mantener actualizada.
En el móvil, la tableta o el PCEl mismo módulo en cualquier navegador actual, con la pantalla adaptada al dispositivo.

Questions about the Pile in clay module

What does the GeoTerva Pile in clay module calculate?

Point and skin resistance of a single pile in undrained clay. The point bearing by Meyerhof, Vesic or Reese & O’Neill and the skin friction by the α, λ or β method in layered clay. Each layer carries its own cu, and the adhesion factor is shown for every layer.

What do I enter in the Pile in clay module?

Pile geometry; clay layers with γ and cu; water table; and methods for the point and the shaft, factor of safety.

What results does the Pile in clay module give?

Qp, Qs, Qu and Qall; α, λ or β with its numbers, layer by layer; skin friction down the pile; and the resistance diagrams. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile in clay module use?

α method; λ method; β method; and reese & O’Neill.

How much does the Pile in clay module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile in clay module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.