GeoTerva 7 Tage kostenlos

Modul Ausgesteifte Baugrube in Sand

Scheinbare Erddruckverteilung, Steifen, Gurtungen und Verbau in Sand.

Mit einem kostenlosen Konto lässt sich jedes Modul 7 Tage lang kostenlos öffnen.Dieses Modul lässt sich zudem ganz ohne Konto an einem Rechenbeispiel öffnen: kostenlose Demo testen.

Die scheinbare Erddruckverteilung nach Peck für Sand bei Grundwasserspiegel unterhalb oder oberhalb der Baugrubensohle, die Steifenkräfte aus den gelenkig gelagerten Feldern sowie die Widerstandsmomente von Verbau und Gurtungen. Bei Wasserhaltung in der Baugrube wird der Sicherheitsfaktor gegen Erosionsgrundbruch nachgewiesen.

Sie geben ein

  • Baugrubentiefe und -breite
  • Sand: γ und φ′, Grundwasserspiegel
  • Steifenlagen und Steifenabstand
  • Stahlgüten und Norm

Sie erhalten

  • Die Erddruck-Einhüllende
  • Die Kraft jeder Steife
  • Profile von Verbau und Gurtung
  • Sicherheitsfaktor gegen Erosionsgrundbruch
Ausgesteifte Baugruben · Ausgesteifte Baugrube in Sand
Modul Ausgesteifte Baugrube in Sand: die Bildschirme am Rechenbeispiel – Modell, Ergebnisse, Berechnungen und Theorie

Zeichnung und Nachweisergebnis nach dem Berechnen.

Weiterführend

Weitere Module im Bereich Ausgesteifte Baugruben

Warum die Bedienung einfach ist

Online, in Ihrem BrowserAuf Ihrem Gerät läuft nur der Browser: Seite öffnen und arbeiten.
Kein Dongle, keine InstallationKein Lizenzschlüssel, kein Hardware-Kopierschutz, keine Installation, die aktuell gehalten werden muss.
Auf Smartphone, Tablet oder PCDasselbe Modul in jedem aktuellen Browser, mit einer an das Gerät angepassten Bildschirmaufteilung.

Questions about the Braced cut in sand module

What does the GeoTerva Braced cut in sand module calculate?

Apparent pressure, struts, wales and sheeting in sand. Peck’s envelope for sand with the water table below or above the base, the strut loads from the hinged spans, and the section moduli of the sheeting and the wales. When the cut is dewatered the factor of safety against piping is checked.

What do I enter in the Braced cut in sand module?

Cut depth and width; sand γ and φ′, water table; strut levels and spacing; and steel grades and code.

What results does the Braced cut in sand module give?

The pressure envelope; the load of every strut; sheeting and wale sections; and factor of safety against piping. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Braced cut in sand module use?

Peck (1969); EN 1993-1-1; and AISC 360-22.

How much does the Braced cut in sand module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Braced cut in sand module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.