GeoTerva 7 gün ücretsiz dene

Hansen taşıma gücü modülü

Eğimli zemin, eğik taban ve eğik yük için tek bir denklem.

Ücretsiz bir hesapla her modül 7 gün boyunca ücretsiz açılır.On bir modül ise hiç hesap gerekmeden çözümlü bir örnekle açılır: deneyin.

Hansen denklemi, klasik denklemlerin dışarıda bıraktığı üç düzeltmeyi kapsar: şev yakınındaki bir temel, yatay olmayan bir taban ve düşey olmayan bir yük. Hansen'in kendi Nγ ifadesi kullanılır ve her katsayı açıkça yazılır.

Girdiler

  • Temel geometrisi ve derinliği
  • Zemin eğimi ve taban eğimi
  • Yük eğimi
  • Zemin dayanımı, yeraltı su seviyesi, güvenlik sayısı

Çıktılar

  • qu ve qall
  • Şekil, derinlik, yük eğimi, taban eğimi ve zemin eğimi katsayıları
  • Şev ve taban eğimiyle birlikte kesit
  • Uygulanan gerilmeye göre kontrol
Taşıma gücü · Hansen
Hansen taşıma gücü modülü: çözümlü örnek üzerindeki ekranları; model, sonuçlar, hesaplar ve teori

Analizden sonra çizim ve karar.

Daha fazlası

Taşıma gücü paketindeki diğer modüller

Kullanımı neden kolay

Çevrim içi, tarayıcınızdaBilgisayarınızda tarayıcı dışında hiçbir şey çalışmaz: sayfayı açın ve çalışmaya başlayın.
Donanım kilidi yok, kurulum yokLisans anahtarı, donanım kilidi ya da güncel tutulması gereken bir kurulum yoktur.
Telefonda, tablette ya da bilgisayardaGüncel her tarayıcıda aynı modül; ekran düzeni cihaza göre uyarlanır.

Questions about the Hansen module

What does the GeoTerva Hansen module calculate?

One equation for sloping ground, a tilted base and an inclined load. Hansen’s equation covers the three corrections that the classical equations leave out: a footing near a slope, a base that is not horizontal and a load that is not vertical. Hansen’s own Nγ is used, and every factor is written out.

What do I enter in the Hansen module?

Footing geometry and depth; ground slope and base tilt; load inclination; and soil strength, water table, factor of safety.

What results does the Hansen module give?

qu and qall; shape, depth, inclination, base and ground factors; the section with the slope and the tilt; and the check against the applied pressure. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Hansen module use?

Hansen (1970).

How much does the Hansen module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Bearing Capacity pack (5 modules): $199 a year or $20 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Hansen module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.