GeoTerva 7 dagen gratis

Module Totale zetting voor klei- en zandlagen

Totale zetting van een grondprofiel met klei- en zandlagen.

Elke module is met een gratis account 7 dagen gratis te openen.Elf modules zijn zonder account direct te proberen met een rekenvoorbeeld: probeer ze uit.

De totale zetting van een rechthoekige of strookfundering op beide soorten lagen: de directe zetting van elke laag volgens de elasticiteitstheorie (klei ongedraineerd, zand gedraineerd) plus de consolidatie van de kleilagen langs hun volledige spanningspad. De spanningen, vervormingen en zettingen worden als kleurzones in de doorsnede weergegeven en de zetting-tijd-kromme volgt uit de consolidatie.

U voert in

  • Funderingsafmetingen, diepte en belasting
  • Lagen, cohesief of niet-cohesief, met E en ν
  • Kleilagen: e₀, Cc, Cr, Cs of mv, σ′p, cv
  • Grondwaterstand en de ontgraving

U krijgt

  • Directe zetting, consolidatiezetting en totale zetting
  • Midden, hoek en stijve fundering
  • De zetting van elke afzonderlijke laag
  • De zetting-tijdkromme
  • Kleurbanden van spanning, rek en zetting
Zakkingen · Zetting 2D
Module Totale zetting voor klei- en zandlagen: schermen met het rekenvoorbeeld, het model, de resultaten, de berekeningen en de theorie

De tekening en het oordeel na Berekenen.

Verder lezen

Meer modules in Zettingen

Waarom het eenvoudig in gebruik is

Online, in uw browserEr draait niets op uw computer behalve de browser: open de pagina en werk.
Geen dongle, niets te installerenGeen licentiesleutel, geen hardwareslot, geen installatie om bij te houden.
Op smartphone, tablet of pcDezelfde module in elke moderne browser, met een schermindeling afgestemd op het apparaat.

Questions about the Settlement 2D module

What does the GeoTerva Settlement 2D module calculate?

Total settlement of a profile of clay and sand layers. The total settlement of a rectangular or strip foundation on layers of both kinds: the immediate settlement of every layer by the theory of elasticity (clay undrained, sand drained) plus the consolidation of the clay layers along their full stress path. The stresses, the strain and the settlement are drawn as colour bands over the section, and the settlement–time curve follows from the consolidation.

What do I enter in the Settlement 2D module?

Foundation size, depth and pressure; layers, cohesive or granular, with E and ν; clay layers: e₀, Cc, Cr, Cs or mv, σ′_p, cv; and water table and the excavation.

What results does the Settlement 2D module give?

Immediate, consolidation and total settlement; centre, corner and rigid foundation; the settlement of every layer; the settlement–time curve; and colour bands of stress, strain and settlement. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Settlement 2D module use?

Steinbrenner; boussinesq; and terzaghi consolidation.

How much does the Settlement 2D module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Settlement pack (4 modules): $299 a year or $30 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Settlement 2D module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.