GeoTerva 7일간 무료

수평하중을 받는 단항말뚝 모듈 (p–y 곡선)

p–y 곡선법을 이용한 다층 지반 내 말뚝의 변위, 휨모멘트 및 전단력 해석이다.

무료 계정 생성 시 모든 모듈을 7일간 무료로 이용할 수 있습니다. 11개 모듈은 계정 없이도 계산 예제로 체험 가능합니다: 체험하기.

최대 8개 지층(사질토 또는 점성토)에 시공되어 두부에 수평하중을 받는 단항말뚝. 지반 반응은 API RP 2A(사질토) 및 Matlock(점성토)의 정적/반복 p–y 곡선 또는 탄성 지반반력법을 적용하여 산정한다. 두부 조건은 자유단 또는 회전구속단으로 설정할 수 있으며, 하중은 지표면 상부에 작용할 수 있고 변형된 형상을 고려하여 축하중이 작용한다.

입력 항목

  • 말뚝 단면, 길이 및 돌출 길이
  • 최대 8개 지층 적용 가능 (사질토 또는 점성토)
  • 지하수위
  • 두부의 수평하중, 모멘트 및 축하중

결과

  • 말뚝 깊이별 변위, 회전각, 휨모멘트, 전단력 및 지반반력
  • 5개 심도에서의 p–y 곡선
  • 하중–변위 곡선
  • 허용 변위 또는 허용 휨모멘트에 대응하는 하중
말뚝 · 수평하중을 받는 말뚝
수평하중을 받는 말뚝 모듈(p–y 곡선): 계산 예제, 모델, 결과, 계산과정 및 이론 화면

해석 실행 후 단면도 및 적합성 판정.

더 알아보기

말뚝 분야의 다른 모듈

GeoTerva의 장점

웹 브라우저 기반 온디맨드 수행별도 프로그램 설치 없이 브라우저를 열고 바로 해석을 수행합니다.
동글 불필요 · 프로그램 설치 없음라이선스 키, 하드웨어 락, 지속적인 업데이트 설치 과정이 필요하지 않습니다.
스마트폰, 태블릿, PC 완벽 지원모든 최신 브라우저에서 기기 화면에 최적화된 레이아웃으로 모듈을 제공합니다.

Questions about the Pile under lateral load module

What does the GeoTerva Pile under lateral load module calculate?

Deflection, moment and shear along a pile in layered ground, by p–y curves. A single pile loaded sideways at its head, in up to eight layers of sand or clay. The ground reacts through the p–y curves of API RP 2A for sand and of Matlock for clay, static or cyclic, or through an elastic subgrade reaction. The head is free or held against rotation, the load may act above the ground, and an axial load acts through the deflected shape.

What do I enter in the Pile under lateral load module?

Pile section, length and free length; up to eight layers, sand or clay; water table; and load, moment and axial load at the head.

What results does the Pile under lateral load module give?

Deflection, rotation, moment, shear and soil reaction along the pile; the p–y curves at five depths; the load–deflection curve; and the load at an allowable deflection or moment. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile under lateral load module use?

API sand curve; matlock clay curve; and elastic subgrade reaction.

How much does the Pile under lateral load module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile under lateral load module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.