GeoTerva 7일간 무료

무리말뚝 모듈

다층 지반 내 무리말뚝의 각 말뚝 분담하중, 무리말뚝 효율, 침하량 및 수평 거동 해석이다.

무료 계정 생성 시 모든 모듈을 7일간 무료로 이용할 수 있습니다. 11개 모듈은 계정 없이도 계산 예제로 체험 가능합니다: 체험하기.

최대 8개 지층(사질토 및 점성토)에 시공된 강체 캡 하의 연직 무리말뚝. 캡 하중은 말뚝 간에 분배되며, 지지력은 각 지층별 무리말뚝 효율을 고려한 단항 지지력 합계와 블록 지지력 중 작은 값으로 결정된다. 침하량은 무리말뚝의 탄성침하량과 2L/3 하부 점성토의 압밀침하량의 합으로 산정되며, 수평하중 작용 시 지층별 p–y 곡선에 p-승수를 적용하여 열별로 하중을 분배한다.

입력 항목

  • 열 및 말뚝배치, 간격, 단면 및 길이
  • 최대 8개 지층 적용 가능 (사질토 또는 점성토)
  • 지하수위
  • 기초캡에 작용하는 연직하중, 수평하중 및 모멘트

결과

  • 각 말뚝의 압축 및 인발 하중
  • 무리말뚝 효율, 블록 지지력 및 허용하중
  • 탄성침하량 및 압밀침하량
  • 기초캡의 변위 및 각 열의 분배 하중
말뚝 · 무리말뚝
무리말뚝 모듈: 계산 예제, 모델, 결과, 계산과 이론 화면

해석 실행 후 단면도 및 적합성 판정.

더 알아보기

말뚝 분야의 다른 모듈

GeoTerva의 장점

웹 브라우저 기반 온디맨드 수행별도 프로그램 설치 없이 브라우저를 열고 바로 해석을 수행합니다.
동글 불필요 · 프로그램 설치 없음라이선스 키, 하드웨어 락, 지속적인 업데이트 설치 과정이 필요하지 않습니다.
스마트폰, 태블릿, PC 완벽 지원모든 최신 브라우저에서 기기 화면에 최적화된 레이아웃으로 모듈을 제공합니다.

Questions about the Pile group module

What does the GeoTerva Pile group module calculate?

The load on every pile, the group effect, the settlement and the lateral response of a group in layered ground. A group of vertical piles under a rigid cap, in up to eight layers of sand and clay. The cap load is shared among the piles; the capacity is worked out as individual piles, each layer with the efficiency of its own soil, and as a block, and the lesser governs; the settlement is the elastic settlement of the group and the consolidation of the clay below 2L/3; and under a lateral load the rows share it unequally, by p-multipliers on the p–y curves of the layers.

What do I enter in the Pile group module?

Rows and piles, spacing, section and length; up to eight layers, sand or clay; water table; and vertical load, lateral load and moments on the cap.

What results does the Pile group module give?

The load on every pile, in compression and tension; efficiency, block capacity and the allowable load; elastic and consolidation settlement; and the deflection of the cap and the load of every row. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile group module use?

Converse–Labarre; kishida–Meyerhof, AASHTO; block failure; and p-multipliers.

How much does the Pile group module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile group module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.