地下水位が掘削底面より下の場合と上の場合に対する砂のPeckの包絡分布、ヒンジ支間から求める切ばり軸力、土留め壁と腹起こしの断面係数を扱います。掘削内を排水する場合は、パイピングに対する安全率を照査します。
入力するもの
- 掘削深さと掘削幅
- 砂のγとφ′、地下水位
- 切ばりのレベルと間隔
- 鋼材の材質と基準
得られるもの
- 土圧の包絡分布
- 各切ばりの軸力
- 土留め壁と腹起こしの断面
- パイピングに対する安全率

計算実行後の図と判定。
地下水位が掘削底面より下の場合と上の場合に対する砂のPeckの包絡分布、ヒンジ支間から求める切ばり軸力、土留め壁と腹起こしの断面係数を扱います。掘削内を排水する場合は、パイピングに対する安全率を照査します。
入力するもの
得られるもの

計算実行後の図と判定。
Apparent pressure, struts, wales and sheeting in sand. Peck’s envelope for sand with the water table below or above the base, the strut loads from the hinged spans, and the section moduli of the sheeting and the wales. When the cut is dewatered the factor of safety against piping is checked.
Cut depth and width; sand γ and φ′, water table; strut levels and spacing; and steel grades and code.
The pressure envelope; the load of every strut; sheeting and wale sections; and factor of safety against piping. Every step of the working is written out, and the results go into a Word or PDF report.
Peck (1969); EN 1993-1-1; and AISC 360-22.
Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Braced Cuts pack (3 modules): $249 a year or $25 a month, per user, in US dollars without sales tax. It is also in the Retaining & excavation bundle ($799 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.
Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.