GeoTerva Gratis per 7 giorni

Modulo palo soggetto a carico orizzontale (curve p–y)

Spostamento, momento flettente e taglio lungo un palo in terreno stratificato mediante curve p–y.

Ogni modulo è accessibile gratuitamente per 7 giorni creando un account gratuito. Undici moduli si aprono senza alcun account su un esempio di calcolo: provali.

Un singolo palo caricato orizzontalmente in testa, fino a un massimo di otto strati di sabbia o argilla. Il terreno reagisce mediante le curve p–y di API RP 2A per la sabbia e di Matlock per l'argilla, statiche o cicliche, oppure tramite una reazione elastica del sottofondo. La testa è libera o vincolata alla rotazione, il carico può agire al di sopra del piano di campagna e un carico assiale agisce sulla configurazione deformata.

Parametri di input

  • Sezione del palo, lunghezza e tratto libero
  • Fino a otto strati, sabbia o argilla
  • Falda freatica
  • Carico, momento e carico assiale in testa

Si ottiene

  • Spostamento, rotazione, momento, taglio e reazione del terreno lungo il palo
  • Le curve p–y a cinque profondità
  • La curva carico–spostamento
  • Il carico corrispondente a uno spostamento o momento ammissibile
Pali · Palo soggetto a carico orizzontale
Modulo palo soggetto a carico orizzontale (curve p–y): le schermate dell'esempio di calcolo, del modello, dei risultati, dei calcoli e della teoria

Il disegno e l'esito della verifica dopo aver fatto clic su Analizza.

Approfondisci

Altri moduli in Pali

Perché è semplice da usare

Online, nel tuo browserNulla viene eseguito sul tuo computer tranne il browser: apri la pagina e lavora.
Nessun dongle, nulla da installareNessuna chiave di licenza, nessun blocco hardware, nessuna installazione da aggiornare.
Su smartphone, tablet o PCLo stesso modulo in qualsiasi browser recente, con l'interfaccia adattata al dispositivo.

Questions about the Pile under lateral load module

What does the GeoTerva Pile under lateral load module calculate?

Deflection, moment and shear along a pile in layered ground, by p–y curves. A single pile loaded sideways at its head, in up to eight layers of sand or clay. The ground reacts through the p–y curves of API RP 2A for sand and of Matlock for clay, static or cyclic, or through an elastic subgrade reaction. The head is free or held against rotation, the load may act above the ground, and an axial load acts through the deflected shape.

What do I enter in the Pile under lateral load module?

Pile section, length and free length; up to eight layers, sand or clay; water table; and load, moment and axial load at the head.

What results does the Pile under lateral load module give?

Deflection, rotation, moment, shear and soil reaction along the pile; the p–y curves at five depths; the load–deflection curve; and the load at an allowable deflection or moment. Every step of the working is written out, and the results go into a Word or PDF report.

Which methods does the Pile under lateral load module use?

API sand curve; matlock clay curve; and elastic subgrade reaction.

How much does the Pile under lateral load module cost, and can I try it free?

Yes: a free account opens every module for 7 days, on screen, with no card. The module is part of the Piles pack (5 modules): $349 a year or $35 a month, per user, in US dollars without sales tax. It is also in the Foundations bundle ($579 a year). GeoTerva Complete opens all 53 modules for $1,599 a year. Saving, reports and model files start with the paid period.

Does the Pile under lateral load module run on a phone or a tablet?

Yes. It runs online in any current browser, on a phone, a tablet or a PC: no installation and no dongle. SI, SI-tf and US units are available.